[Bf-docboard-svn] bf-manual: [8474] trunk/blender_docs/manual/modeling/geometry_nodes: Geometry Nodes: Rename 12 Nodes to be verb first
Dalai Felinto
noreply at blender.org
Thu Oct 14 18:33:54 CEST 2021
Revision: 8474
https://developer.blender.org/rBM8474
Author: dfelinto
Date: 2021-10-14 18:33:54 +0200 (Thu, 14 Oct 2021)
Log Message:
-----------
Geometry Nodes: Rename 12 Nodes to be verb first
This is a follow up for rBecedef09e7fde9c032b746137211f02acfb6160a.
Modified Paths:
--------------
trunk/blender_docs/manual/modeling/geometry_nodes/attribute/attribute_compare.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst
trunk/blender_docs/manual/modeling/geometry_nodes/material/index.rst
trunk/blender_docs/manual/modeling/geometry_nodes/mesh/index.rst
trunk/blender_docs/manual/modeling/geometry_nodes/mesh/subdivide.rst
trunk/blender_docs/manual/modeling/geometry_nodes/utilities/index.rst
Added Paths:
-----------
trunk/blender_docs/manual/modeling/geometry_nodes/curve/fill_curve.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/reverse_curve.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/subdivide_curve.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/trim_curve.rst
trunk/blender_docs/manual/modeling/geometry_nodes/material/assign_material.rst
trunk/blender_docs/manual/modeling/geometry_nodes/material/replace_material.rst
trunk/blender_docs/manual/modeling/geometry_nodes/mesh/mesh_boolean.rst
trunk/blender_docs/manual/modeling/geometry_nodes/utilities/compare_float.rst
Removed Paths:
-------------
trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_fill.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_reverse.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_subdivide.rst
trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_trim.rst
trunk/blender_docs/manual/modeling/geometry_nodes/material/assign.rst
trunk/blender_docs/manual/modeling/geometry_nodes/material/replace.rst
trunk/blender_docs/manual/modeling/geometry_nodes/mesh/boolean.rst
trunk/blender_docs/manual/modeling/geometry_nodes/utilities/float_compare.rst
Modified: trunk/blender_docs/manual/modeling/geometry_nodes/attribute/attribute_compare.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/attribute/attribute_compare.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/attribute/attribute_compare.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -9,7 +9,7 @@
This node is considered legacy and will be removed in Blender 4.0.
- Please use the :doc:`/modeling/geometry_nodes/utilities/float_compare` instead.
+ Please use the :doc:`/modeling/geometry_nodes/utilities/compare_float` instead.
.. figure:: /images/modeling_geometry-nodes_attribute_attribute-compare_node.png
:align: right
Deleted: trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_fill.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_fill.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_fill.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -1,40 +0,0 @@
-.. index:: Geometry Nodes; Curve Fill
-.. _bpy.types.GeometryNodeCurveFill:
-
-******************
-Curve Fill Node
-******************
-
-.. figure:: /images/modeling_geometry-nodes_curve_curve-fill_node.png
- :align: center
-
- The Curve Fill node.
-
-The *Curve Fill* node generates a mesh using the Constrained Delaunay Triangulation
-algorithm with the curves as boundaries. The mesh is only generated at z = 0,
-i.e. on the ground plane.
-
-Inputs
-======
-
-Curve
- Standard geometry input with a curve component.
-
-
-Properties
-==========
-
-Mode
- The type of geometry the output consists of.
-
- :Triangles:
- The output is made up of triangles.
- :N-gons:
- The output is made up of N-gons.
-
-
-Outputs
-=======
-
-Mesh
- The filled in curves.
Deleted: trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_reverse.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_reverse.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_reverse.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -1,37 +0,0 @@
-.. index:: Geometry Nodes; Curve Reverse
-.. _bpy.types.GeometryNodeCurveReverse:
-
-******************
-Curve Reverse Node
-******************
-
-.. figure:: /images/modeling_geometry-nodes_curve_curve-reverse_node.png
- :align: center
-
- The Curve Reverse node.
-
-The *Curve Reverse* node swaps the start and end of splines.
-The shape of the splines is not changed.
-
-
-Inputs
-======
-
-Curve
- Standard geometry input.
-
-Selection
- The points whose splines are reversed.
-
-
-Properties
-==========
-
-This node has no properties.
-
-
-Outputs
-=======
-
-Curve
- Standard geometry output.
Deleted: trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_subdivide.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_subdivide.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_subdivide.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -1,31 +0,0 @@
-.. index:: Geometry Nodes; Curve Subdivide
-.. _bpy.types.GeometryNodeCurveSubdivide:
-
-********************
-Curve Subdivide Node
-********************
-
-.. figure:: /images/modeling_geometry-nodes_curve_curve-subdivide_node.png
- :align: center
-
- The Curve Subdivide node.
-
-The *Curve Subdivide* node cuts spline segments without changing their shape.
-
-
-Inputs
-======
-
-Geometry
- Standard geometry input.
-
-Cuts
- Number of times each segment is cut.
- When the input is a field, the number of cuts for a segment is determined by
- the value of the field when evaluated at the previous point.
-
-Outputs
-=======
-
-Geometry:
- Standard geometry output.
Deleted: trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_trim.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_trim.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_trim.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -1,52 +0,0 @@
-.. index:: Geometry Nodes; Curve Trim
-.. _bpy.types.GeometryNodeCurveTrim:
-
-***************
-Curve Trim Node
-***************
-
-.. figure:: /images/modeling_geometry-nodes_curve_curve-trim_node.png
- :align: center
-
- The *Curve Trim* node.
-
-The *Curve Trim* node shortens each spline in the curve by removing sections at
-the start and end of each spline.
-
-Bézier splines will still be Bézier splines in the output, with the first and last control point and
-its handles moved as necessary to preserve the shape.
-NURBS splines will be transformed into poly splines in order to be trimmed.
-
-
-Inputs
-======
-
-Curve
- Standard geometry input with a curve component.
-
-Start
- The factor or length used to determine where to start each output spline.
-
-End
- The factor or length used to determine where to end each output spline.
-
-
-Properties
-==========
-
-Mode
- How to find endpoint positions for the trimmed spline.
-
- :Factor:
- Find the endpoint positions using a factor of each spline's length.
- The input values should be between 0 or 1.
- :Length:
- Find the endpoint positions using a length from the start of each spline.
- The input values should be between 0 and the length of the splines.
-
-
-Outputs
-=======
-
-Curve
- Standard geometry output.
Copied: trunk/blender_docs/manual/modeling/geometry_nodes/curve/fill_curve.rst (from rev 8473, trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_fill.rst)
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/fill_curve.rst (rev 0)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/fill_curve.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -0,0 +1,40 @@
+.. index:: Geometry Nodes; Fill Curve
+.. _bpy.types.GeometryNodeFillCurve:
+
+******************
+Fill Curve Node
+******************
+
+.. figure:: /images/modeling_geometry-nodes_curve_curve-fill_node.png
+ :align: center
+
+ The Fill Curve node.
+
+The *Fill Curve* node generates a mesh using the Constrained Delaunay Triangulation
+algorithm with the curves as boundaries. The mesh is only generated at z = 0,
+i.e. on the ground plane.
+
+Inputs
+======
+
+Curve
+ Standard geometry input with a curve component.
+
+
+Properties
+==========
+
+Mode
+ The type of geometry the output consists of.
+
+ :Triangles:
+ The output is made up of triangles.
+ :N-gons:
+ The output is made up of N-gons.
+
+
+Outputs
+=======
+
+Mesh
+ The filled in curves.
Modified: trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst 2021-10-11 16:32:59 UTC (rev 8473)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -6,16 +6,16 @@
.. toctree::
:maxdepth: 1
- curve_fill.rst
curve_endpoints.rst
curve_length.rst
- curve_reverse.rst
- curve_subdivide.rst
curve_to_mesh.rst
curve_to_points.rst
- curve_trim.rst
+ fill_curve.rst
handle_type_selection.rst
mesh_to_curve.rst
resample_curve.rst
+ reverse_curve.rst
set_handle_type.rst
set_spline_type.rst
+ subdivide_curve.rst
+ trim_curve.rst
Copied: trunk/blender_docs/manual/modeling/geometry_nodes/curve/reverse_curve.rst (from rev 8473, trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_reverse.rst)
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/reverse_curve.rst (rev 0)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/reverse_curve.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -0,0 +1,37 @@
+.. index:: Geometry Nodes; Reverse Curve
+.. _bpy.types.GeometryNodeReverseCurve:
+
+******************
+Reverse Curve Node
+******************
+
+.. figure:: /images/modeling_geometry-nodes_curve_curve-reverse_node.png
+ :align: center
+
+ The Reverse Curve node.
+
+The *Reverse Curve* node swaps the start and end of splines.
+The shape of the splines is not changed.
+
+
+Inputs
+======
+
+Curve
+ Standard geometry input.
+
+Selection
+ The points whose splines are reversed.
+
+
+Properties
+==========
+
+This node has no properties.
+
+
+Outputs
+=======
+
+Curve
+ Standard geometry output.
Copied: trunk/blender_docs/manual/modeling/geometry_nodes/curve/subdivide_curve.rst (from rev 8473, trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_subdivide.rst)
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/subdivide_curve.rst (rev 0)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/subdivide_curve.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -0,0 +1,31 @@
+.. index:: Geometry Nodes; Subdivide Curve
+.. _bpy.types.GeometryNodeSubdivideCurve:
+
+********************
+Subdivide Curve Node
+********************
+
+.. figure:: /images/modeling_geometry-nodes_curve_curve-subdivide_node.png
+ :align: center
+
+ The Subdivide Curve node.
+
+The *Subdivide Curve* node cuts spline segments without changing their shape.
+
+
+Inputs
+======
+
+Geometry
+ Standard geometry input.
+
+Cuts
+ Number of times each segment is cut.
+ When the input is a field, the number of cuts for a segment is determined by
+ the value of the field when evaluated at the previous point.
+
+Outputs
+=======
+
+Geometry:
+ Standard geometry output.
Copied: trunk/blender_docs/manual/modeling/geometry_nodes/curve/trim_curve.rst (from rev 8473, trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_trim.rst)
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/trim_curve.rst (rev 0)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/trim_curve.rst 2021-10-14 16:33:54 UTC (rev 8474)
@@ -0,0 +1,52 @@
+.. index:: Geometry Nodes; Trim Curve
+.. _bpy.types.GeometryNodeTrimCurve:
+
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-docboard-svn
mailing list