[Bf-docboard-svn] bf-manual: [7382] trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings: GP: Move Brush Setting to own heading in the tool docs
Aaron Carlisle
noreply at blender.org
Wed Nov 18 19:06:48 CET 2020
Revision: 7382
https://developer.blender.org/rBM7382
Author: Blendify
Date: 2020-11-18 19:06:47 +0100 (Wed, 18 Nov 2020)
Log Message:
-----------
GP: Move Brush Setting to own heading in the tool docs
Modified Paths:
--------------
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/arc.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/box.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/draw_brush.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/erase_brush.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/fill_brush.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/circle.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/curve.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/draw.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/erase.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/fill.rst
trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/polyline.rst
Modified: trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/arc.rst
===================================================================
--- trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/arc.rst 2020-11-16 20:13:20 UTC (rev 7381)
+++ trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/arc.rst 2020-11-18 18:06:47 UTC (rev 7382)
@@ -13,6 +13,10 @@
The Arc tool create simple arcs.
+Tool Settings
+=============
+
+
Usage
=====
Modified: trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/box.rst
===================================================================
--- trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/box.rst 2020-11-16 20:13:20 UTC (rev 7381)
+++ trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/box.rst 2020-11-18 18:06:47 UTC (rev 7382)
@@ -13,20 +13,9 @@
The Box tool create rectangular shapes.
-Usage
-=====
+Tool Settings
+=============
-Selecting a Brush and Material
-------------------------------
-
-In the Tool Settings select the brush, material and color type to use with the tool.
-The Box tool uses *Draw Brush* types.
-See :ref:`grease-pencil-draw-common-options` for more information.
-
-
-Common Brush Options
---------------------
-
You can configure the brush main settings exposed on the Tool Settings for convenience.
For the draw brushes configuration and settings see:
:doc:`Draw Brush </grease_pencil/modes/draw/tool_settings/brushes/draw_brush>`.
@@ -39,6 +28,17 @@
When enabled, the stroke use a curve profile to control the thickness along the line.
+Usage
+=====
+
+Selecting a Brush and Material
+------------------------------
+
+In the Tool Settings select the brush, material and color type to use with the tool.
+The Box tool uses *Draw Brush* types.
+See :ref:`grease-pencil-draw-common-options` for more information.
+
+
Creating Boxes
--------------
Modified: trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/draw_brush.rst
===================================================================
--- trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/draw_brush.rst 2020-11-16 20:13:20 UTC (rev 7381)
+++ trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/draw_brush.rst 2020-11-18 18:06:47 UTC (rev 7382)
@@ -29,7 +29,7 @@
Brush Specials
Reset Brush
- Reset the current brush to its default settings.
+ Reset the current brush to its default settings.
Reset All Brushes
Reset all brushes to their default settings.
@@ -43,187 +43,3 @@
.. note::
In order to save a custom brush in a blend-user, enable *Fake User*.
-
-
-Brush Settings
-==============
-
-Material
- Data-block selector for the :doc:`material </grease_pencil/materials/introduction>`.
-
-Radius
- The radius of the brush in pixels.
-
- :kbd:`F` allows you to change the brush size interactively by dragging the mouse/pen or
- by typing a number then confirm.
-
- Use Pressure (pressure sensitivity icon)
- Uses stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-Strength
- Control the stroke transparency (alpha).
- From totally transparent (0.0) to fully opaque (1.0).
-
- You can change the brush strength interactively by pressing :kbd:`Shift-F`
- in the 3D Viewport and then moving the mouse/pen and then :kbd:`LMB`.
- You can also enter the size numerically.
-
- Use Pressure (pressure sensitivity icon)
- Uses stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-
-Advanced
---------
-
-Input Samples
- Controls how often the input device is read to generate points on the stroke.
- Higher values give a higher precision (more points) but produce an irregular stroke,
- while lower values give a lower precision (fewer points) but produce a soften stroke.
- (0 disabled extra input device samples.)
-
- You have to set up this value according to your input device to obtain
- the right balance between accuracy and softness for your strokes.
- See :doc:`Input Device </getting_started/configuration/hardware>` for more information.
-
-Active Smooth
- The number of smoothing iterations to apply to the stroke while drawing.
-
-Angle
- Direction of the input device that gives the maximum thickness to the stroke (0° for horizontal).
-
- Factor
- Amount of thickness reduction when the stroke is perpendicular to the *Angle* value.
-
-Hardness
- Amount of transparency (alpha) to apply from the border of the point to the center.
- Works only when the brush is using stroke materials of *Dot* or *Box* style.
-
- Aspect Ratio
- Controls the width and height of the alpha gradient.
-
- X, Y
-
-
-Stroke
-------
-
-Post-Processing
-^^^^^^^^^^^^^^^
-
-Post-processing methods that are executed on the strokes
-when you finished drawing, right after releasing the :kbd:`LMB` or :kbd:`Pen` tip.
-You can toggle the use of post-processing using the checkbox in the section panel header.
-
-Smooth
- Strength of smoothing process on the points location along the stroke.
-
- Iterations
- The number of smoothing iterations to apply to the stroke.
-
-Subdivision Steps
- Number of subdivisions to apply to newly created strokes.
-
-Simplify
- Reduces final points numbers in the stroke with an adaptive algorithm.
-
-Trim Strokes End
- Automatically trim intersection strokes ends.
-
-
-.. _bpy.types.BrushGpencilSettings.use_settings_random:
-.. _bpy.types.BrushGpencilSettings.random:
-.. _bpy.types.BrushGpencilSettings.uv_random:
-.. _bpy.types.BrushGpencilSettings.pen_jitter:
-.. _bpy.types.BrushGpencilSettings.use_jitter_pressure:
-
-Randomize
-^^^^^^^^^
-
-Adds randomness to the position of the points along the stroke.
-You can toggle the use of Randomize using the checkbox in the section panel header.
-
-Radius
- The amount of randomness to apply using the pressure of the input device.
-
- Stroke Random (stroke icon)
- Use randomness only at stroke level.
-
- Use Pressure (pressure sensitivity icon)
- Uses the stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-Strength
- The amount of randomness to apply to the stroke strength value (alpha).
-
- Stroke Random (stroke icon)
- Use randomness only at stroke level.
-
- Use Pressure (pressure sensitivity icon)
- Uses the stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-UV
- The amount of randomness to apply to the UV rotation.
-
- Stroke Random (stroke icon)
- Use randomness only at stroke level.
-
- Use Pressure (pressure sensitivity icon)
- Uses the stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-Hue, Saturation, Value
- Randomizes the hue, saturation, and value of the stroke's :ref:`Color <grease-pencil-draw-color>`.
-
- Stroke Random (stroke icon)
- Use randomness only at stroke level.
-
- Use Pressure (pressure sensitivity icon)
- Uses the stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-Jitter
- The amount of jittering to add to the stroke.
-
- Stroke Random (stroke icon)
- Use randomness only at stroke level.
-
- Use Pressure (pressure sensitivity icon)
- Uses the stylus pressure to control how strong the effect is.
- The gradient of the pressure can be customized using
- the :doc:`curve widget </interface/controls/templates/curve>`.
-
-
-.. _grease-pencil-draw-brushes-stabilizer:
-.. _bpy.types.BrushGpencilSettings.use_settings_stabilizer:
-.. _bpy.types.Brush.smooth_stroke:
-
-Stabilize Stroke
-^^^^^^^^^^^^^^^^
-
-*Stabilize Stroke* helps to reduce jitter of the strokes while drawing by
-delaying and correcting the location of points.
-You can toggle the use of *Stabilize Stroke* using the checkbox in the section panel header.
-
-Radius
- Minimum distance from the last point before the stroke continues.
-Factor
- A smooth factor, where higher values result in smoother strokes but the drawing sensation
- feels like as if you were pulling the stroke.
-
-
-Cursor
-------
-
-The cursor can be disabled by toggling the checkbox in the *Cursor* header.
-
-Show Fill Color While Drawing
- Shows the brush linked material color in the viewport.
Modified: trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/erase_brush.rst
===================================================================
--- trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/erase_brush.rst 2020-11-16 20:13:20 UTC (rev 7381)
+++ trunk/blender_docs/manual/grease_pencil/modes/draw/tool_settings/brushes/erase_brush.rst 2020-11-18 18:06:47 UTC (rev 7382)
@@ -46,48 +46,3 @@
.. note::
To save a custom brush in a blend-user, enable *Fake User*.
-
-
-Brush Settings
---------------
-
-Radius
- The radius of the brush in pixels.
-
- :kbd:`F` allows you to change the brush size interactively by dragging the mouse/pen or
- by typing a number then confirm.
-
- Use Pressure (pressure sensitivity icon)
- Uses stylus pressure to control how strong the effect is.
- Occlude Eraser (overlapping squares icon)
- Erase only strokes visible and not occluded by geometry.
-
-Mode
- Determines how the erase tool behaves.
-
- Dissolve
- To simulate a raster type eraser, this eraser type
- affects the strength and thickness of the strokes before actually delete a point.
-
- Strength
- Control how much will affect the eraser has on the stroke transparency (alpha).
-
- You can change the brush strength interactively by pressing :kbd:`Shift-F`
- in the 3D Viewport and then moving the mouse/pen and then :kbd:`LMB`.
- You can also enter the size numerically.
-
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-docboard-svn
mailing list