[Bf-translations-svn] SVN commit: /data/svn/bf-translations [2635] branches/zh_TW: Update for new Tab contens.
bf-translations at blender.org
bf-translations at blender.org
Sun Mar 9 15:54:36 CET 2014
Revision: 2635
http://projects.blender.org/scm/viewvc.php?view=rev&root=bf-translations&revision=2635
Author: zerng07
Date: 2014-03-09 14:54:36 +0000 (Sun, 09 Mar 2014)
Log Message:
-----------
Update for new Tab contens.
Modified Paths:
--------------
branches/zh_TW/zh_TW.mo
branches/zh_TW/zh_TW.po
Modified: branches/zh_TW/zh_TW.mo
===================================================================
(Binary files differ)
Modified: branches/zh_TW/zh_TW.po
===================================================================
--- branches/zh_TW/zh_TW.po 2014-03-09 05:33:37 UTC (rev 2634)
+++ branches/zh_TW/zh_TW.po 2014-03-09 14:54:36 UTC (rev 2635)
@@ -10,7 +10,7 @@
"Project-Id-Version: Blender 2.69 (sub 11) (b'58bd0e5')\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-03-04 14:57:03\n"
-"PO-Revision-Date: 2014-02-26 23:32+0800\n"
+"PO-Revision-Date: 2014-03-09 22:52+0800\n"
"Last-Translator: Cheng-Chia Tseng <pswo10680 at gmail.com>\n"
"Language-Team: chinese-l10n <chinese-l10n at googlegroups.com>\n"
"Language: zh_TW\n"
@@ -19,7 +19,7 @@
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 1.5.4\n"
-"X-Poedit-Bookmarks: 19357,18446,13680,5545,19262,-1,-1,-1,-1,-1"
+"X-Poedit-Bookmarks: 19357,18446,13680,5545,19262,-1,-1,-1,-1,-1\n"
#. :src: bpy.types.ActionGroup
msgid "Action Group"
@@ -927,7 +927,9 @@
msgstr "繼續"
#. :src: bpy.types.ActionActuator.use_continue_last_frame
-msgid "Restore last frame when switching on/off, otherwise play from the start each time"
+msgid ""
+"Restore last frame when switching on/off, otherwise play from the start each "
+"time"
msgstr "當開啟/關閉時還原末框幀，否則每次均從頭開始播放"
#. :src: bpy.types.ActionActuator.property
@@ -1015,8 +1017,13 @@
msgstr "優先度"
#. :src: bpy.types.ActionActuator.priority
-msgid "Execution priority - lower numbers will override actions with higher numbers (with 2 or more actions at once, the overriding channels must be lower in the stack)"
-msgstr "執行優先度 - 較低的數值會被較高的值凌駕。(如果同時有 2 個或多個動作時，凌駕的通道在堆疊中必須較低)"
+msgid ""
+"Execution priority - lower numbers will override actions with higher numbers "
+"(with 2 or more actions at once, the overriding channels must be lower in "
+"the stack)"
+msgstr ""
+"執行優先度 - 較低的數值會被較高的值凌駕。(如果同時有 2 個或多個動作時，凌駕的"
+"通道在堆疊中必須較低)"
#. :src: bpy.types.ActionActuator.layer
#. :src: bpy.types.Brush.sculpt_tool:'LAYER'
@@ -1165,7 +1172,9 @@
msgstr "添加"
#. :src: bpy.types.ActionActuator.use_additive
-msgid "Action is added to the current loc/rot/scale in global or local coordinate according to Local flag"
+msgid ""
+"Action is added to the current loc/rot/scale in global or local coordinate "
+"according to Local flag"
msgstr "根據區域旗標將動作添加至目前全域或區域座標軸的位置/旋轉/縮放"
#. :src: bpy.types.ActionActuator.use_force
@@ -1182,7 +1191,9 @@
msgstr "力"
#. :src: bpy.types.ActionActuator.use_force
-msgid "Apply Action as a global or local force depending on the local option (dynamic objects only)"
+msgid ""
+"Apply Action as a global or local force depending on the local option "
+"(dynamic objects only)"
msgstr "根據區域選項將動作套用至全域或區域作用力 (僅限動態物體)"
#. :src: bpy.types.ActionActuator.use_local
@@ -1443,7 +1454,9 @@
msgstr "第二目標"
#. :src: bpy.types.ArmatureActuator.secondary_target
-msgid "Set this object as the secondary target of the constraint (only IK polar target at the moment)"
+msgid ""
+"Set this object as the secondary target of the constraint (only IK polar "
+"target at the moment)"
msgstr "設定此物體為約束的第二目標 (目前僅適用於 IK 的兩極目標)"
#. :src: bpy.types.ArmatureActuator.weight
@@ -1546,8 +1559,7 @@
#. :src: bpy.types.RandomActuator.float_min
#. :src: bpy.types.OBJECT_OT_vertex_warp.min
#. :src: bpy.types.WM_OT_properties_edit.min
-#: scripts/addons/cycles/ui.py:201
-#: scripts/addons/cycles/ui.py:214
+#: scripts/addons/cycles/ui.py:201 scripts/addons/cycles/ui.py:214
#: scripts/startup/bl_ui/properties_constraint.py:252
#: scripts/startup/bl_ui/properties_constraint.py:259
#: scripts/startup/bl_ui/properties_constraint.py:266
@@ -1585,8 +1597,7 @@
#. :src: bpy.types.CompositorNodeChannelMatte.limit_method:'MAX'
#. :src: bpy.types.OBJECT_OT_vertex_warp.max
#. :src: bpy.types.WM_OT_properties_edit.max
-#: scripts/addons/cycles/ui.py:200
-#: scripts/addons/cycles/ui.py:213
+#: scripts/addons/cycles/ui.py:200 scripts/addons/cycles/ui.py:213
#: scripts/startup/bl_ui/properties_constraint.py:253
#: scripts/startup/bl_ui/properties_constraint.py:260
#: scripts/startup/bl_ui/properties_constraint.py:267
@@ -1988,8 +1999,7 @@
#. :src: bpy.types.NearSensor.distance
#. :src: bpy.types.RadarSensor.distance
#. :src: bpy.types.WorldLighting.distance
-#: scripts/addons/cycles/ui.py:471
-#: scripts/addons/cycles/ui.py:843
+#: scripts/addons/cycles/ui.py:471 scripts/addons/cycles/ui.py:843
#: scripts/startup/bl_ui/properties_constraint.py:218
#: scripts/startup/bl_ui/properties_data_bone.py:355
#: scripts/startup/bl_ui/properties_data_camera.py:173
@@ -2112,8 +2122,12 @@
#. :src: bpy.types.ConstraintActuator.angle_min
#, fuzzy
-msgid "Minimum angle to maintain with target direction (no correction is done if angle with target direction is between min and max)"
-msgstr "與目標方向間需維持的最小角度 (單位為度) (如果目標方向間的角度介於最小與最大之間則不修正)"
+msgid ""
+"Minimum angle to maintain with target direction (no correction is done if "
+"angle with target direction is between min and max)"
+msgstr ""
+"與目標方向間需維持的最小角度 (單位為度) (如果目標方向間的角度介於最小與最大之"
+"間則不修正)"
#. :src: bpy.types.ConstraintActuator.angle_max
#. :src: bpy.types.MESH_OT_beautify_fill.angle_limit
@@ -2126,8 +2140,12 @@
#. :src: bpy.types.ConstraintActuator.angle_max
#, fuzzy
-msgid "Maximum angle allowed with target direction (no correction is done if angle with target direction is between min and max)"
-msgstr "與目標方向間可允許的最大角度 (單位為度) (如果目標方向間的角度介於最小與最大之間則不修正)"
+msgid ""
+"Maximum angle allowed with target direction (no correction is done if angle "
+"with target direction is between min and max)"
+msgstr ""
+"與目標方向間可允許的最大角度 (單位為度) (如果目標方向間的角度介於最小與最大之"
+"間則不修正)"
#. :src: bpy.types.ConstraintActuator.fh_height
msgid "Height of the force field area"
@@ -2160,7 +2178,9 @@
msgstr "N"
#. :src: bpy.types.ConstraintActuator.use_normal
-msgid "Set object axis along (local axis) or parallel (global axis) to the normal at hit position"
+msgid ""
+"Set object axis along (local axis) or parallel (global axis) to the normal "
+"at hit position"
msgstr "於命中位置沿著 (區域軸) 或平行 (全域軸) 法線設定物體軸"
#. :src: bpy.types.ConstraintActuator.use_persistent
@@ -2372,7 +2392,9 @@
msgstr "網格"
#. :src: bpy.types.EditObjectActuator.mesh
-msgid "Replace the existing, when left blank 'Phys' will remake the existing physics mesh"
+msgid ""
+"Replace the existing, when left blank 'Phys' will remake the existing "
+"physics mesh"
msgstr "替換既有的，當「物理」留空時將重新製作既有的物理網格"
#. :src: bpy.types.EditObjectActuator.time
@@ -2434,7 +2456,9 @@
msgstr "物理"
#. :src: bpy.types.EditObjectActuator.use_replace_physics_mesh
-msgid "Replace the physics mesh (triangle bounds only - compound shapes not supported)"
+msgid ""
+"Replace the physics mesh (triangle bounds only - compound shapes not "
+"supported)"
msgstr "替換物理網格 (僅三角形邊界 - 不支援複合外形)"
#. :src: bpy.types.EditObjectActuator.use_3d_tracking
@@ -2739,7 +2763,9 @@
msgstr "檔案"
#. :src: bpy.types.GameActuator.filename
-msgid "Load this blend file, use the \"//\" prefix for a path relative to the current blend file"
+msgid ""
+"Load this blend file, use the \"//\" prefix for a path relative to the "
+"current blend file"
msgstr "載入這個交混檔，使用「//」前綴符號表示相對於目前交混檔的路徑"
#. :src: bpy.types.MessageActuator
@@ -2753,7 +2779,8 @@
msgstr "給"
#. :src: bpy.types.MessageActuator.to_property
-msgid "Optional, send message to objects with this name only, or empty to broadcast"
+msgid ""
+"Optional, send message to objects with this name only, or empty to broadcast"
msgstr "選用，僅傳送資訊給此名稱的物體，或是留空作為廣播"
#. :src: bpy.types.MessageActuator.subject
@@ -2840,7 +2867,8 @@
msgstr "參照物體"
#. :src: bpy.types.ObjectActuator.reference_object
-msgid "Reference object for velocity calculation, leave empty for world reference"
+msgid ""
+"Reference object for velocity calculation, leave empty for world reference"
msgstr "速度計算的參照物體，留空時為世界參照"
#. :src: bpy.types.ObjectActuator.damping
@@ -3087,8 +3115,13 @@
msgstr "力距"
#. :src: bpy.types.ObjectActuator.linear_velocity
-msgid "Linear velocity (in Servo mode it sets the target relative linear velocity, it will be achieved by automatic application of force - Null velocity is a valid target)"
-msgstr "線性速度 (於 Servo 模式中，它用來設定目標的相對線性速度，它會藉由力的自動應用來達成 - 「空」速度為有效目標)"
+msgid ""
+"Linear velocity (in Servo mode it sets the target relative linear velocity, "
+"it will be achieved by automatic application of force - Null velocity is a "
+"valid target)"
+msgstr ""
+"線性速度 (於 Servo 模式中，它用來設定目標的相對線性速度，它會藉由力的自動應用"
+"來達成 - 「空」速度為有效目標)"
#. :src: bpy.types.ObjectActuator.angular_velocity
msgid "Angular velocity"
@@ -3378,7 +3411,9 @@
msgstr "複合"
#. :src: bpy.types.ParentActuator.use_compound
-msgid "Add this object shape to the parent shape (only if the parent shape is already compound)"
+msgid ""
+"Add this object shape to the parent shape (only if the parent shape is "
+"already compound)"
msgstr "添加此物體外形至親代外形 (唯若親代外形已為複合外形)"
#. :src: bpy.types.ParentActuator.use_ghost
@@ -3549,7 +3584,9 @@
msgstr "種子"
#. :src: bpy.types.RandomActuator.seed
-msgid "Initial seed of the random generator, use Python for more freedom (choose 0 for not random)"
+msgid ""
+"Initial seed of the random generator, use Python for more freedom (choose 0 "
+"for not random)"
msgstr "隨機生成器的初始種子，使用 Python 取得更多自由度 (選擇 0 不要隨機)"
#. :src: bpy.types.RandomActuator.property
@@ -3811,8 +3848,11 @@
msgstr "圓錐外增益"
#. :src: bpy.types.SoundActuator.cone_outer_gain_3d
-msgid "The gain outside the outer cone (the gain in the outer cone will be interpolated between this value and the normal gain in the inner cone)"
-msgstr "在外圓錐之外的增益 (外圓錐內的增益會在此值與內圓錐內的一般增益間進行插補處理)"
+msgid ""
+"The gain outside the outer cone (the gain in the outer cone will be "
+"interpolated between this value and the normal gain in the inner cone)"
+msgstr ""
+"在外圓錐之外的增益 (外圓錐內的增益會在此值與內圓錐內的一般增益間進行插補處理)"
#. :src: bpy.types.SoundActuator.cone_outer_angle_3d
msgid "Cone Outer Angle"
@@ -4054,7 +4094,9 @@
msgstr "可見"
#. :src: bpy.types.VisibilityActuator.use_visible
-msgid "Set the objects visible (initialized from the object render restriction toggle in physics button)"
+msgid ""
+"Set the objects visible (initialized from the object render restriction "
+"toggle in physics button)"
msgstr "將物體設為可見 (從物理按鈕中的算繪限制切換來初始化)"
#. :src: bpy.types.VisibilityActuator.use_occlusion
@@ -4062,7 +4104,9 @@
msgstr "遮蔽"
#. :src: bpy.types.VisibilityActuator.use_occlusion
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-translations-svn
mailing list