[Bf-translations-svn] SVN commit: /data/svn/bf-translations [2548] branches/zh_TW: fix one " number" translation.

bf-translations at blender.org bf-translations at blender.org
Sun Jan 19 17:05:04 CET 2014


Revision: 2548
          http://projects.blender.org/scm/viewvc.php?view=rev&root=bf-translations&revision=2548
Author:   zerng07
Date:     2014-01-19 16:05:03 +0000 (Sun, 19 Jan 2014)
Log Message:
-----------
fix one "number" translation.

Modified Paths:
--------------
    branches/zh_TW/zh_TW.mo
    branches/zh_TW/zh_TW.po

Modified: branches/zh_TW/zh_TW.mo
===================================================================
(Binary files differ)

Modified: branches/zh_TW/zh_TW.po
===================================================================
--- branches/zh_TW/zh_TW.po	2014-01-18 01:52:32 UTC (rev 2547)
+++ branches/zh_TW/zh_TW.po	2014-01-19 16:05:03 UTC (rev 2548)
@@ -10,7 +10,7 @@
 "Project-Id-Version: Blender 2.69 (sub 8) (b'6ba0268')\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-01-15 10:50:50\n"
-"PO-Revision-Date: 2014-01-03 23:22+0800\n"
+"PO-Revision-Date: 2014-01-20 00:02+0800\n"
 "Last-Translator: Cheng-Chia Tseng <pswo10680 at gmail.com>\n"
 "Language-Team: chinese-l10n <chinese-l10n at googlegroups.com>\n"
 "Language: zh_TW\n"
@@ -19,7 +19,7 @@
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 1.5.4\n"
-"X-Poedit-Bookmarks: 19357,18446,13680,5545,19262,-1,-1,-1,-1,-1"
+"X-Poedit-Bookmarks: 19357,18446,13680,5545,19262,-1,-1,-1,-1,-1\n"
 
 #. :src: bpy.types.ActionGroup
 msgid "Action Group"
@@ -925,7 +925,9 @@
 msgstr "繼續"
 
 #. :src: bpy.types.ActionActuator.use_continue_last_frame
-msgid "Restore last frame when switching on/off, otherwise play from the start each time"
+msgid ""
+"Restore last frame when switching on/off, otherwise play from the start each "
+"time"
 msgstr "當開啟/關閉時還原末框幀,否則每次均從頭開始播放"
 
 #. :src: bpy.types.ActionActuator.property
@@ -1013,8 +1015,13 @@
 msgstr "優先度"
 
 #. :src: bpy.types.ActionActuator.priority
-msgid "Execution priority - lower numbers will override actions with higher numbers (with 2 or more actions at once, the overriding channels must be lower in the stack)"
-msgstr "執行優先度 - 較低的數值會被較高的值凌駕。(如果同時有 2 個或多個動作時,凌駕的通道在堆疊中必須較低)"
+msgid ""
+"Execution priority - lower numbers will override actions with higher numbers "
+"(with 2 or more actions at once, the overriding channels must be lower in "
+"the stack)"
+msgstr ""
+"執行優先度 - 較低的數值會被較高的值凌駕。(如果同時有 2 個或多個動作時,凌駕的"
+"通道在堆疊中必須較低)"
 
 #. :src: bpy.types.ActionActuator.layer
 #. :src: bpy.types.Brush.sculpt_tool:'LAYER'
@@ -1161,7 +1168,9 @@
 msgstr "添加"
 
 #. :src: bpy.types.ActionActuator.use_additive
-msgid "Action is added to the current loc/rot/scale in global or local coordinate according to Local flag"
+msgid ""
+"Action is added to the current loc/rot/scale in global or local coordinate "
+"according to Local flag"
 msgstr "根據區域旗標將動作添加至目前全域或區域座標軸的位置/旋轉/縮放"
 
 #. :src: bpy.types.ActionActuator.use_force
@@ -1178,7 +1187,9 @@
 msgstr "力"
 
 #. :src: bpy.types.ActionActuator.use_force
-msgid "Apply Action as a global or local force depending on the local option (dynamic objects only)"
+msgid ""
+"Apply Action as a global or local force depending on the local option "
+"(dynamic objects only)"
 msgstr "根據區域選項將動作套用至全域或區域作用力 (僅限動態物體)"
 
 #. :src: bpy.types.ActionActuator.use_local
@@ -1439,7 +1450,9 @@
 msgstr "第二目標"
 
 #. :src: bpy.types.ArmatureActuator.secondary_target
-msgid "Set this object as the secondary target of the constraint (only IK polar target at the moment)"
+msgid ""
+"Set this object as the secondary target of the constraint (only IK polar "
+"target at the moment)"
 msgstr "設定此物體為約束的第二目標 (目前僅適用於 IK 的兩極目標)"
 
 #. :src: bpy.types.ArmatureActuator.weight
@@ -1540,8 +1553,7 @@
 #. :src: bpy.types.RandomActuator.float_min
 #. :src: bpy.types.OBJECT_OT_vertex_warp.min
 #. :src: bpy.types.WM_OT_properties_edit.min
-#: scripts/addons/cycles/ui.py:195
-#: scripts/addons/cycles/ui.py:208
+#: scripts/addons/cycles/ui.py:195 scripts/addons/cycles/ui.py:208
 #: scripts/startup/bl_ui/properties_constraint.py:252
 #: scripts/startup/bl_ui/properties_constraint.py:259
 #: scripts/startup/bl_ui/properties_constraint.py:266
@@ -1578,8 +1590,7 @@
 #. :src: bpy.types.CompositorNodeChannelMatte.limit_method:'MAX'
 #. :src: bpy.types.OBJECT_OT_vertex_warp.max
 #. :src: bpy.types.WM_OT_properties_edit.max
-#: scripts/addons/cycles/ui.py:194
-#: scripts/addons/cycles/ui.py:207
+#: scripts/addons/cycles/ui.py:194 scripts/addons/cycles/ui.py:207
 #: scripts/startup/bl_ui/properties_constraint.py:253
 #: scripts/startup/bl_ui/properties_constraint.py:260
 #: scripts/startup/bl_ui/properties_constraint.py:267
@@ -1979,8 +1990,7 @@
 #. :src: bpy.types.NearSensor.distance
 #. :src: bpy.types.RadarSensor.distance
 #. :src: bpy.types.WorldLighting.distance
-#: scripts/addons/cycles/ui.py:463
-#: scripts/addons/cycles/ui.py:835
+#: scripts/addons/cycles/ui.py:463 scripts/addons/cycles/ui.py:835
 #: scripts/startup/bl_ui/properties_constraint.py:218
 #: scripts/startup/bl_ui/properties_data_bone.py:355
 #: scripts/startup/bl_ui/properties_data_camera.py:173
@@ -2103,8 +2113,12 @@
 
 #. :src: bpy.types.ConstraintActuator.angle_min
 #, fuzzy
-msgid "Minimum angle to maintain with target direction (no correction is done if angle with target direction is between min and max)"
-msgstr "與目標方向間需維持的最小角度 (單位為度) (如果目標方向間的角度介於最小與最大之間則不修正)"
+msgid ""
+"Minimum angle to maintain with target direction (no correction is done if "
+"angle with target direction is between min and max)"
+msgstr ""
+"與目標方向間需維持的最小角度 (單位為度) (如果目標方向間的角度介於最小與最大之"
+"間則不修正)"
 
 #. :src: bpy.types.ConstraintActuator.angle_max
 #. :src: bpy.types.MESH_OT_beautify_fill.angle_limit
@@ -2117,8 +2131,12 @@
 
 #. :src: bpy.types.ConstraintActuator.angle_max
 #, fuzzy
-msgid "Maximum angle allowed with target direction (no correction is done if angle with target direction is between min and max)"
-msgstr "與目標方向間可允許的最大角度 (單位為度) (如果目標方向間的角度介於最小與最大之間則不修正)"
+msgid ""
+"Maximum angle allowed with target direction (no correction is done if angle "
+"with target direction is between min and max)"
+msgstr ""
+"與目標方向間可允許的最大角度 (單位為度) (如果目標方向間的角度介於最小與最大之"
+"間則不修正)"
 
 #. :src: bpy.types.ConstraintActuator.fh_height
 msgid "Height of the force field area"
@@ -2151,7 +2169,9 @@
 msgstr "N"
 
 #. :src: bpy.types.ConstraintActuator.use_normal
-msgid "Set object axis along (local axis) or parallel (global axis) to the normal at hit position"
+msgid ""
+"Set object axis along (local axis) or parallel (global axis) to the normal "
+"at hit position"
 msgstr "於命中位置沿著 (區域軸) 或平行 (全域軸) 法線設定物體軸"
 
 #. :src: bpy.types.ConstraintActuator.use_persistent
@@ -2363,7 +2383,9 @@
 msgstr "網格"
 
 #. :src: bpy.types.EditObjectActuator.mesh
-msgid "Replace the existing, when left blank 'Phys' will remake the existing physics mesh"
+msgid ""
+"Replace the existing, when left blank 'Phys' will remake the existing "
+"physics mesh"
 msgstr "替換既有的,當「物理」留空時將重新製作既有的物理網格"
 
 #. :src: bpy.types.EditObjectActuator.time
@@ -2425,7 +2447,9 @@
 msgstr "物理"
 
 #. :src: bpy.types.EditObjectActuator.use_replace_physics_mesh
-msgid "Replace the physics mesh (triangle bounds only - compound shapes not supported)"
+msgid ""
+"Replace the physics mesh (triangle bounds only - compound shapes not "
+"supported)"
 msgstr "替換物理網格 (僅三角形邊界 - 不支援複合外形)"
 
 #. :src: bpy.types.EditObjectActuator.use_3d_tracking
@@ -2729,7 +2753,9 @@
 msgstr "檔案"
 
 #. :src: bpy.types.GameActuator.filename
-msgid "Load this blend file, use the \"//\" prefix for a path relative to the current blend file"
+msgid ""
+"Load this blend file, use the \"//\" prefix for a path relative to the "
+"current blend file"
 msgstr "載入這個交混檔,使用「//」前綴符號表示相對於目前交混檔的路徑"
 
 #. :src: bpy.types.MessageActuator
@@ -2743,7 +2769,8 @@
 msgstr "給"
 
 #. :src: bpy.types.MessageActuator.to_property
-msgid "Optional, send message to objects with this name only, or empty to broadcast"
+msgid ""
+"Optional, send message to objects with this name only, or empty to broadcast"
 msgstr "選用,僅傳送資訊給此名稱的物體,或是留空作為廣播"
 
 #. :src: bpy.types.MessageActuator.subject
@@ -2830,7 +2857,8 @@
 msgstr "參照物體"
 
 #. :src: bpy.types.ObjectActuator.reference_object
-msgid "Reference object for velocity calculation, leave empty for world reference"
+msgid ""
+"Reference object for velocity calculation, leave empty for world reference"
 msgstr "速度計算的參照物體,留空時為世界參照"
 
 #. :src: bpy.types.ObjectActuator.damping
@@ -3077,8 +3105,13 @@
 msgstr "力距"
 
 #. :src: bpy.types.ObjectActuator.linear_velocity
-msgid "Linear velocity (in Servo mode it sets the target relative linear velocity, it will be achieved by automatic application of force - Null velocity is a valid target)"
-msgstr "線性速度 (於 Servo 模式中,它用來設定目標的相對線性速度,它會藉由力的自動應用來達成 - 「空」速度為有效目標)"
+msgid ""
+"Linear velocity (in Servo mode it sets the target relative linear velocity, "
+"it will be achieved by automatic application of force - Null velocity is a "
+"valid target)"
+msgstr ""
+"線性速度 (於 Servo 模式中,它用來設定目標的相對線性速度,它會藉由力的自動應用"
+"來達成 - 「空」速度為有效目標)"
 
 #. :src: bpy.types.ObjectActuator.angular_velocity
 msgid "Angular velocity"
@@ -3368,7 +3401,9 @@
 msgstr "複合"
 
 #. :src: bpy.types.ParentActuator.use_compound
-msgid "Add this object shape to the parent shape (only if the parent shape is already compound)"
+msgid ""
+"Add this object shape to the parent shape (only if the parent shape is "
+"already compound)"
 msgstr "添加此物體外形至親代外形 (唯若親代外形已為複合外形)"
 
 #. :src: bpy.types.ParentActuator.use_ghost
@@ -3539,7 +3574,9 @@
 msgstr "種子"
 
 #. :src: bpy.types.RandomActuator.seed
-msgid "Initial seed of the random generator, use Python for more freedom (choose 0 for not random)"
+msgid ""
+"Initial seed of the random generator, use Python for more freedom (choose 0 "
+"for not random)"
 msgstr "隨機生成器的初始種子,使用 Python 取得更多自由度 (選擇 0 不要隨機)"
 
 #. :src: bpy.types.RandomActuator.property
@@ -3801,8 +3838,11 @@
 msgstr "圓錐外增益"
 
 #. :src: bpy.types.SoundActuator.cone_outer_gain_3d
-msgid "The gain outside the outer cone (the gain in the outer cone will be interpolated between this value and the normal gain in the inner cone)"
-msgstr "在外圓錐之外的增益 (外圓錐內的增益會在此值與內圓錐內的一般增益間進行插補處理)"
+msgid ""
+"The gain outside the outer cone (the gain in the outer cone will be "
+"interpolated between this value and the normal gain in the inner cone)"
+msgstr ""
+"在外圓錐之外的增益 (外圓錐內的增益會在此值與內圓錐內的一般增益間進行插補處理)"
 
 #. :src: bpy.types.SoundActuator.cone_outer_angle_3d
 msgid "Cone Outer Angle"
@@ -4044,7 +4084,9 @@
 msgstr "可見"
 
 #. :src: bpy.types.VisibilityActuator.use_visible
-msgid "Set the objects visible (initialized from the object render restriction toggle in physics button)"
+msgid ""
+"Set the objects visible (initialized from the object render restriction "
+"toggle in physics button)"
 msgstr "將物體設為可見 (從物理按鈕中的算繪限制切換來初始化)"
 
 #. :src: bpy.types.VisibilityActuator.use_occlusion
@@ -4052,7 +4094,9 @@
 msgstr "遮蔽"
 
 #. :src: bpy.types.VisibilityActuator.use_occlusion

@@ Diff output truncated at 10240 characters. @@


More information about the Bf-translations-svn mailing list