[Bf-docboard-svn] bf-manual: [9125] trunk/blender_docs/manual: Cleanup: trailing space

Campbell Barton noreply at blender.org
Tue Mar 15 04:49:42 CET 2022 

Revision: 9125
          https://developer.blender.org/rBM9125
Author:   campbellbarton
Date:     2022-03-15 04:49:42 +0100 (Tue, 15 Mar 2022)
Log Message:
-----------
Cleanup: trailing space

Modified Paths:
--------------
    trunk/blender_docs/manual/addons/import_export/mesh_atomic.rst
    trunk/blender_docs/manual/addons/import_export/pc2.rst
    trunk/blender_docs/manual/addons/mesh/snap_utilities_line.rst
    trunk/blender_docs/manual/addons/mesh/tissue.rst
    trunk/blender_docs/manual/addons/system/demo_mode.rst
    trunk/blender_docs/manual/animation/constraints/transform/transform_cache.rst
    trunk/blender_docs/manual/editors/preferences/viewport.rst
    trunk/blender_docs/manual/editors/spreadsheet.rst
    trunk/blender_docs/manual/files/linked_libraries/library_overrides.rst
    trunk/blender_docs/manual/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/attributes_reference.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/curve/resample_curve.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/instances.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/introduction.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/utilities/boolean_math.rst
    trunk/blender_docs/manual/modeling/meshes/editing/mesh/knife_project.rst
    trunk/blender_docs/manual/modeling/modifiers/generate/subdivision_surface.rst
    trunk/blender_docs/manual/render/cycles/gpu_rendering.rst
    trunk/blender_docs/manual/render/cycles/object_settings/adaptive_subdiv.rst
    trunk/blender_docs/manual/render/cycles/object_settings/cameras.rst
    trunk/blender_docs/manual/render/cycles/render_settings/performance.rst
    trunk/blender_docs/manual/video_editing/sequencer/sidebar/modifiers.rst

Modified: trunk/blender_docs/manual/addons/import_export/mesh_atomic.rst
===================================================================
--- trunk/blender_docs/manual/addons/import_export/mesh_atomic.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/addons/import_export/mesh_atomic.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -246,7 +246,6 @@
    structure, there is only *one representative ball object*!
 
 
-
 Atomic Blender Utilities Panel
 ==============================
 

Modified: trunk/blender_docs/manual/addons/import_export/pc2.rst
===================================================================
--- trunk/blender_docs/manual/addons/import_export/pc2.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/addons/import_export/pc2.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -46,5 +46,5 @@
 
   .. code-block:: sh
 
-     cacheFile -pc2 1 -pcf "<insert filepath of source>" -f "<insert target filename w/o extension>" 
+     cacheFile -pc2 1 -pcf "<insert filepath of source>" -f "<insert target filename w/o extension>"
      -dir "<insert directory path for target>" -format "OneFile";

Modified: trunk/blender_docs/manual/addons/mesh/snap_utilities_line.rst
===================================================================
--- trunk/blender_docs/manual/addons/mesh/snap_utilities_line.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/addons/mesh/snap_utilities_line.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -34,7 +34,7 @@
 
 Edge Constrain :kbd:`Shift`
    Constraint the cursor movement towards an edge. For the constrain work, you need to have
-   your cursor over an edge. This is useful for creating parallel lines. 
+   your cursor over an edge. This is useful for creating parallel lines.
 
 Confirm Input :kbd:`Return`
    Confirms the numerical value written in the header for the line length.
@@ -48,11 +48,10 @@
 :kbd:`Tab`
    Snap limited to only faces.
 
-Cancel :kbd:`Esc` 
+Cancel :kbd:`Esc`
    Cancel the operation.
 
 
-
 Options
 =======
 

Modified: trunk/blender_docs/manual/addons/mesh/tissue.rst
===================================================================
--- trunk/blender_docs/manual/addons/mesh/tissue.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/addons/mesh/tissue.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -397,7 +397,6 @@
    Invert the values read from vertex weight.
 
 
-
 Example
 =======
 

Modified: trunk/blender_docs/manual/addons/system/demo_mode.rst
===================================================================
--- trunk/blender_docs/manual/addons/system/demo_mode.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/addons/system/demo_mode.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -44,7 +44,7 @@
 
 These keyword arguments show up in generated ``demo.py``, e.g::
 
-   dict(anim_cycles=2, anim_render=False, anim_screen_switch=0.0, anim_time_max=8.0, anim_time_min=4.0, 
+   dict(anim_cycles=2, anim_render=False, anim_screen_switch=0.0, anim_time_max=8.0, anim_time_min=4.0,
    display_render=4.0, file='foobar.blend', mode='AUTO'),
 
 - ``anim_cycles`` -- Number of times to play the animation.

Modified: trunk/blender_docs/manual/animation/constraints/transform/transform_cache.rst
===================================================================
--- trunk/blender_docs/manual/animation/constraints/transform/transform_cache.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/animation/constraints/transform/transform_cache.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -16,7 +16,6 @@
 the :doc:`Mesh Sequence Cache modifier </modeling/modifiers/modify/mesh_sequence_cache>` is used.
 
 
-
 Options
 =======
 

Modified: trunk/blender_docs/manual/editors/preferences/viewport.rst
===================================================================
--- trunk/blender_docs/manual/editors/preferences/viewport.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/editors/preferences/viewport.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -102,6 +102,6 @@
 ===========
 
 GPU Subdivision
-   Under certain circumstances, the GPU will be used to subdivide a mesh with a 
+   Under certain circumstances, the GPU will be used to subdivide a mesh with a
    :doc:`Subdivision Surface modifier </modeling/modifiers/generate/subdivision_surface>`.
-   This typically results in increased subdivision performance. 
+   This typically results in increased subdivision performance.

Modified: trunk/blender_docs/manual/editors/spreadsheet.rst
===================================================================
--- trunk/blender_docs/manual/editors/spreadsheet.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/editors/spreadsheet.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -79,7 +79,7 @@
 
    :Control Point: Display attributes that are stored per control point.
    :Spline: Display attributes that are stored per spline.
-      
+
 Point Cloud
    Point cloud component containing only point data.
 

Modified: trunk/blender_docs/manual/files/linked_libraries/library_overrides.rst
===================================================================
--- trunk/blender_docs/manual/files/linked_libraries/library_overrides.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/files/linked_libraries/library_overrides.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -86,7 +86,7 @@
    Blender is also able to resync library overrides from external libraries, that are then linked into a
    working file. However, this is a costly process that needs to be fully redone every time the working
    file is loaded, since Blender cannot edit/modify the external library directly.
-   
+
    So users linking overrides (or creating recursive overrides) should ensure that their library files are
    regularly updated, to avoid this overhead on file load (typically, opening and saving those library files
    should be enough to update them).

Modified: trunk/blender_docs/manual/index.rst
===================================================================
--- trunk/blender_docs/manual/index.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/index.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -42,7 +42,6 @@
          :doc:`/getting_started/help`
 
 
-
 Sections
 ========
 

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/attributes_reference.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/attributes_reference.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/attributes_reference.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -101,7 +101,7 @@
   They can be used to store different values on copies of geometry data. Instance domain attributes are
   only supported in geometry nodes.
 
-Attributes are automatically interpolated to other domains. For example, when the 
+Attributes are automatically interpolated to other domains. For example, when the
 :doc:`/modeling/geometry_nodes/input/position` is connected to the selection input of
 the :doc:`/modeling/geometry_nodes/material/set_material` node, the values are interpolated
 from the *Point* domain to the *Face* domain. Normally, domain conversions use simple averages
@@ -340,7 +340,7 @@
       *face corner* domain.
 
 .. note::
-   
+
    This operator only works on *original* object data, not including the results of modifiers,
    so any attributes added or changed by geometry nodes will not be affected. To change the type
    of an attribute generated procedurally, modifiers must be applied.

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/curve/resample_curve.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/resample_curve.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/resample_curve.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -41,7 +41,6 @@
       even when the length of the spline changes.
 
 
-
 Properties
 ==========
 

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/instances.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/instances.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/instances.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -42,7 +42,7 @@
 
 .. figure:: /images/modeling_geometry-nodes_instances-nested.png
    :align: center
-  
+
    A node group that creates nested instancing by chaining
    :doc:`instance on points </modeling/geometry_nodes/instances/instance_on_points>` nodes.
 
@@ -62,7 +62,7 @@
 
 .. warning::
 
-   Only eight levels of nested instancing are supported for rendering and the viewport currently. 
+   Only eight levels of nested instancing are supported for rendering and the viewport currently.
    Though deeper trees of instances can be made inside geometry nodes, they must be realized at the
    end of the node tree.
 

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/introduction.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/introduction.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/introduction.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -24,5 +24,5 @@
 * :doc:`Instances </modeling/geometry_nodes/instances>`
 
 
-The interface of the modifier is described in the 
+The interface of the modifier is described in the
 :doc:`Modifier </modeling/modifiers/generate/geometry_nodes>` page.
\ No newline at end of file

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/utilities/boolean_math.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/utilities/boolean_math.rst	2022-03-15 03:32:56 UTC (rev 9124)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/utilities/boolean_math.rst	2022-03-15 03:49:42 UTC (rev 9125)
@@ -52,7 +52,6 @@
       (`NIMPLY <https://en.wikipedia.org/wiki/NIMPLY_gate>`__)
 
 
-
 Output
 ======
 

Modified: trunk/blender_docs/manual/modeling/meshes/editing/mesh/knife_project.rst
===================================================================

@@ Diff output truncated at 10240 characters. @@

More information about the Bf-docboard-svn mailing list