[Bf-docboard-svn] bf-manual: [8528] trunk/blender_docs/manual/modeling/geometry_nodes: Manual: Geometry Nodes: Draft remaining nodes; fix warnings

Jarrett Johnson noreply at blender.org
Wed Oct 27 04:26:10 CEST 2021 

Revision: 8528
          https://developer.blender.org/rBM8528
Author:   jarrett.johnson
Date:     2021-10-27 04:26:09 +0200 (Wed, 27 Oct 2021)
Log Message:
-----------
Manual: Geometry Nodes: Draft remaining nodes; fix warnings

Modified Paths:
--------------
    trunk/blender_docs/manual/modeling/geometry_nodes/attribute/capture_attribute.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/attribute/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_to_points.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/curve/endpoint_selection.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/input/boolean.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/input/id.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/input/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/input/integer.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/material/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/material/material_index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/material/material_selection.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/material/set_material_index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/mesh/index.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/mesh/mesh_to_curve.rst
    trunk/blender_docs/manual/modeling/geometry_nodes/mesh/mesh_to_points.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/attribute/capture_attribute.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/attribute/capture_attribute.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/attribute/capture_attribute.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -18,10 +18,10 @@
 ======
 
 Geometry
-   Standard geometry input
+   Standard geometry input.
 
 Value
-   Float or Vector input to evaluate 
+   Float or Vector input to evaluate.
 
 
 Properties
@@ -34,7 +34,7 @@
 =======
 
 Geometry
-   The standard geometry output
+   Standard geometry output.
 
 Attribute
    The result of the evaluated field, stored on the geometry.

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/attribute/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/attribute/index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/attribute/index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -9,6 +9,4 @@
    :maxdepth: 1
 
    attribute_statistic.rst
-
-.. missing documentation:
    capture_attribute.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_to_points.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_to_points.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/curve_to_points.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -17,19 +17,21 @@
 ======
 
 Curve
-   xxxxxxxxx
+   Standard curve input.
 
 Count
-   xxxxxxxxx
+   Number of points generated. This input is only available for *Count* mode.
 
+Length
+   Length of the curve. This input is only available for *Length* mode.
 
 Properties
 ==========
 
 Mode
-   :Evaluated: xxxxxxxxx
-   :Count: xxxxxxxxx
-   :Length: xxxxxxxxx
+   :Evaluated: Creates points from the curve's evaluated points based on the resolution attribute for NURBS and Bezier splines.
+   :Count: Samples each spline by evenly distributing the specified number of points.
+   :Length: Samples each spline by splitting it into segments with specified length.
 
 
 Outputs

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/curve/endpoint_selection.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/endpoint_selection.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/endpoint_selection.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,7 +10,7 @@
 
    Endpoint Selection Node
 
-The *Endpoint Selection* node ...
+The *Endpoint Selection* node provides a selection for an arbitrary number of endpoints in each spline in a curve.
 
 
 Inputs
@@ -17,10 +17,10 @@
 ======
 
 Start Size
-   xxxxxxxxx
+   The number of points to select from the start.
 
 End Size
-   xxxxxxxxxx
+   The number of points to select from the end.
 
 Properties
 ==========
@@ -32,5 +32,5 @@
 =======
 
 Selection
-   xxxxxxxxx
+   Selection of start and end of each spline of the curve.
 

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/curve/index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,6 +10,7 @@
 
    curve_length.rst
    curve_to_mesh.rst
+   curve_to_points.rst
    fill_curve.rst
    fillet_curve.rst
    resample_curve.rst
@@ -27,6 +28,7 @@
    curve_parameter.rst
    curve_tangent.rst
    curve_tilt.rst
+   endpoint_selection.rst
    handle_type_selection.rst
    is_spline_cyclic.rst
    spline_length.rst
@@ -44,7 +46,3 @@
    set_spline_cyclic.rst
    set_spline_resolution.rst
    set_spline_type.rst
-
-.. missing documentation:
-   curve_to_points.rst
-   end_point_selection.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/input/boolean.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/input/boolean.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/input/boolean.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,7 +10,7 @@
 
    Boolean Node
 
-The *Boolean* node...
+The *Boolean* node provides a boolean value.
 
 
 Inputs
@@ -29,5 +29,5 @@
 =======
 
 Boolean
-   xxxxxxxxx
+   Standard boolean output.
 

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/input/id.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/input/id.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/input/id.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -15,7 +15,7 @@
 
 The node to set this data is the :doc:`/modeling/geometry_nodes/geometry/set_id` node.
 
-.. node::
+.. note::
 
    Unlike other built-in attribtutes, the *id* attribute does not always exist. In that case, this
    node will output zero.

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/input/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/input/index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/input/index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -8,8 +8,10 @@
 .. toctree::
    :maxdepth: 1
 
+   boolean.rst
    collection_info.rst
    color.rst
+   integer.rst
    is_viewport.rst
    material.rst
    object_info.rst
@@ -18,7 +20,7 @@
    vector.rst
 
 ------------------------
-set_id
+
 .. toctree::
    :maxdepth: 1
 
@@ -27,7 +29,3 @@
    position.rst
    radius.rst
    id.rst
-
-.. missing documentation
-   boolean.rst
-   integer.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/input/integer.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/input/integer.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/input/integer.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,7 +10,7 @@
 
    Integer Node
 
-The *Integer* node...
+The *Integer* node provides an integer value.
 
 
 Inputs
@@ -29,5 +29,4 @@
 =======
 
 Integer
-   xxxxxxxxx
-
+   Standard integer output

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/material/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/material/index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/material/index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -15,6 +15,9 @@
 .. toctree::
    :maxdepth: 1
 
+   material_index.rst
+   material_selection.rst
+
 ------------------------
 
 .. toctree::
@@ -21,8 +24,4 @@
    :maxdepth: 1
 
    set_material.rst
-
-.. missing documentation:
-   material_index.rst
-   material_selection.rst
    set_material_index.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/material/material_index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/material/material_index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/material/material_index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,8 +10,9 @@
 
    Material Index Node
 
-The *Material Index* ...
+The *Material Index* node outputs the material index for a geometry.
 
+The node to set this data is the :doc:`/modeling/geometry_nodes/geometry/set_material_index` node.
 
 Inputs
 ======
@@ -29,4 +30,4 @@
 =======
 
 Material Index
-   xxxxxxxxxxxx
+   Standard integer value

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/material/material_selection.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/material/material_selection.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/material/material_selection.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,7 +10,7 @@
 
    Material Selection Node
 
-The *Material Selection* ...
+The *Material Selection* node provides a selection for meshes that use this material.
 
 
 Inputs
@@ -17,7 +17,7 @@
 ======
 
 Material
-   xxxxxxxxxxxx
+   Standard material input.
 
 
 Properties
@@ -30,4 +30,4 @@
 =======
 
 Selection
-   xxxxxxxxxxxxxxxxx
+   Selection of meshes that use the input material.

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/material/set_material_index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/material/set_material_index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/material/set_material_index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -10,20 +10,21 @@
 
    Set Material Index Node
 
-The *Set Material Index* ...
+The *Set Material Index* node sets the material index for a geometry.
 
+The node to get this data is the :doc:`/modeling/geometry_nodes/geometry/material_index` node.
 
 Inputs
 ======
 
 Geometry
-   xxxxxxxxx
+   Standard geometry input.
 
 Selection
-   xxxxxxxxxx
+   The geometries whose material index will be set.
 
 Material Index
-   xxxxxxxxxxx
+   The new material index.
 
 
 Properties
@@ -36,4 +37,4 @@
 =======
 
 Geometry
-   xxxxxxxxx
+   Standard geometry output.

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/mesh/index.rst
===================================================================
--- trunk/blender_docs/manual/modeling/geometry_nodes/mesh/index.rst	2021-10-26 21:45:14 UTC (rev 8527)
+++ trunk/blender_docs/manual/modeling/geometry_nodes/mesh/index.rst	2021-10-27 02:26:09 UTC (rev 8528)
@@ -9,6 +9,8 @@
    :maxdepth: 1
 
    mesh_boolean.rst
+   mesh_to_curve.rst
+   mesh_to_points.rst
    split_edges.rst
    subdivide_mesh.rst
    subdivision_surface.rst
@@ -27,7 +29,3 @@
    :maxdepth: 1
 
    set_shade_smooth.rst
-
-.. needs documentation::
-   mesh_to_curve.rst
-   mesh_to_points.rst

Modified: trunk/blender_docs/manual/modeling/geometry_nodes/mesh/mesh_to_curve.rst

@@ Diff output truncated at 10240 characters. @@

More information about the Bf-docboard-svn mailing list