[Bf-docboard-svn] bf-manual: [7433] trunk/blender_docs/manual: editors rename remaining properties to sidebar
Tobias Heinke
noreply at blender.org
Sat Nov 28 01:27:35 CET 2020
Revision: 7433
https://developer.blender.org/rBM7433
Author: TobiasH
Date: 2020-11-28 01:27:34 +0100 (Sat, 28 Nov 2020)
Log Message:
-----------
editors rename remaining properties to sidebar
Modified Paths:
--------------
trunk/blender_docs/manual/animation/actions.rst
trunk/blender_docs/manual/animation/drivers/introduction.rst
trunk/blender_docs/manual/compositing/types/distort/stabilize_2d.rst
trunk/blender_docs/manual/editors/drivers_editor.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/editing.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/index.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/introduction.rst
trunk/blender_docs/manual/editors/graph_editor/introduction.rst
trunk/blender_docs/manual/editors/nla/index.rst
trunk/blender_docs/manual/editors/nla/strips.rst
trunk/blender_docs/manual/editors/preferences/system.rst
trunk/blender_docs/manual/movie_clip/masking/index.rst
trunk/blender_docs/manual/movie_clip/tracking/clip/index.rst
trunk/blender_docs/manual/movie_clip/tracking/clip/sidebar/index.rst
trunk/blender_docs/manual/movie_clip/tracking/introduction.rst
trunk/blender_docs/manual/video_editing/preview/index.rst
trunk/blender_docs/manual/video_editing/sequencer/index.rst
trunk/blender_docs/manual/video_editing/sequencer/navigating.rst
trunk/blender_docs/manual/video_editing/sequencer/sidebar/index.rst
Added Paths:
-----------
trunk/blender_docs/manual/editors/graph_editor/fcurves/sidebar/
trunk/blender_docs/manual/editors/graph_editor/fcurves/sidebar/curve.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/sidebar/index.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/sidebar/modifiers.rst
trunk/blender_docs/manual/editors/nla/sidebar.rst
trunk/blender_docs/manual/movie_clip/masking/sidebar.rst
trunk/blender_docs/manual/movie_clip/tracking/clip/sidebar/
trunk/blender_docs/manual/video_editing/preview/sidebar.rst
trunk/blender_docs/manual/video_editing/sequencer/sidebar/
Removed Paths:
-------------
trunk/blender_docs/manual/editors/graph_editor/fcurves/modifiers.rst
trunk/blender_docs/manual/editors/graph_editor/fcurves/properties.rst
trunk/blender_docs/manual/editors/nla/properties_modifiers.rst
trunk/blender_docs/manual/movie_clip/masking/properties.rst
trunk/blender_docs/manual/movie_clip/tracking/clip/properties/
trunk/blender_docs/manual/video_editing/preview/properties.rst
trunk/blender_docs/manual/video_editing/sequencer/properties/
Modified: trunk/blender_docs/manual/animation/actions.rst
===================================================================
--- trunk/blender_docs/manual/animation/actions.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/animation/actions.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -55,7 +55,7 @@
*Actions* can be managed with the *Action data-block menu*
in the Dope Sheet :doc:`Action Editor </editors/dope_sheet/action>` header,
-or the Sidebar region of the :doc:`NLA Editor </editors/nla/properties_modifiers>`.
+or the Sidebar region of the :doc:`NLA Editor </editors/nla/sidebar>`.
If you are making multiple actions for the same object,
press the shield button for each action.
Modified: trunk/blender_docs/manual/animation/drivers/introduction.rst
===================================================================
--- trunk/blender_docs/manual/animation/drivers/introduction.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/animation/drivers/introduction.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -52,7 +52,7 @@
The driver function can be defined artistically with Bézier curve handles or
mathematically with trigonometric functions or polynomial expressions such as :math:`y = a + bx`.
Furthermore, the function can also be procedurally modulated with noise or cyclic repetitions.
-See :doc:`Modifiers </editors/graph_editor/fcurves/modifiers>` for more details.
+See :doc:`Modifiers </editors/graph_editor/fcurves/sidebar/modifiers>` for more details.
Driver Configuration
Modified: trunk/blender_docs/manual/compositing/types/distort/stabilize_2d.rst
===================================================================
--- trunk/blender_docs/manual/compositing/types/distort/stabilize_2d.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/compositing/types/distort/stabilize_2d.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -12,7 +12,7 @@
Stabilizes the footage according to the settings set in
:menuselection:`Movie Clip Editor --> Properties --> Stabilization --> 2D Stabilization`.
For more information,
-see :doc:`2D Stabilization </movie_clip/tracking/clip/properties/stabilization/index>`.
+see :doc:`2D Stabilization </movie_clip/tracking/clip/sidebar/stabilization/index>`.
Inputs
Modified: trunk/blender_docs/manual/editors/drivers_editor.rst
===================================================================
--- trunk/blender_docs/manual/editors/drivers_editor.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/editors/drivers_editor.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -141,7 +141,7 @@
Modifiers Tab
-------------
-See :doc:`F-Curve Modifiers </editors/graph_editor/fcurves/modifiers>`.
+See :doc:`F-Curve Modifiers </editors/graph_editor/fcurves/sidebar/modifiers>`.
.. (Todo) duplicated here: \editors\graph_editor\fcurves\properties.rst
Modified: trunk/blender_docs/manual/editors/graph_editor/fcurves/editing.rst
===================================================================
--- trunk/blender_docs/manual/editors/graph_editor/fcurves/editing.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/editors/graph_editor/fcurves/editing.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -127,7 +127,7 @@
:Hotkey: :kbd:`Shift-Ctrl-M`
Opens a pop-up allowing you to add modifiers to the active F-curve.
-Settings for the :doc:`modifier </editors/graph_editor/fcurves/modifiers>` can be found in
+Settings for the :doc:`modifier </editors/graph_editor/fcurves/sidebar/modifiers>` can be found in
the :menuselection:`Sidebar --> Modifiers` tab.
Modified: trunk/blender_docs/manual/editors/graph_editor/fcurves/index.rst
===================================================================
--- trunk/blender_docs/manual/editors/graph_editor/fcurves/index.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/editors/graph_editor/fcurves/index.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -9,5 +9,4 @@
introduction.rst
editing.rst
- properties.rst
- modifiers.rst
+ sidebar/index.rst
Modified: trunk/blender_docs/manual/editors/graph_editor/fcurves/introduction.rst
===================================================================
--- trunk/blender_docs/manual/editors/graph_editor/fcurves/introduction.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/editors/graph_editor/fcurves/introduction.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -234,7 +234,7 @@
Linear extrapolation.
Additional extrapolation methods (e.g. the *Cycles* modifier)
-are located in the :doc:`F-Curve Modifiers </editors/graph_editor/fcurves/modifiers>`.
+are located in the :doc:`F-Curve Modifiers </editors/graph_editor/fcurves/sidebar/modifiers>`.
.. _editors-graph-fcurves-settings-handles:
Deleted: trunk/blender_docs/manual/editors/graph_editor/fcurves/modifiers.rst
===================================================================
--- trunk/blender_docs/manual/editors/graph_editor/fcurves/modifiers.rst 2020-11-27 23:05:04 UTC (rev 7432)
+++ trunk/blender_docs/manual/editors/graph_editor/fcurves/modifiers.rst 2020-11-28 00:27:34 UTC (rev 7433)
@@ -1,210 +0,0 @@
-.. index:: Modifiers; F-Curve Modifiers
-.. index:: F-Curve Modifiers
-
-.. _bpy.types.FCurveModifiers:
-.. _bpy.types.FModifier:
-
-*****************
-F-Curve Modifiers
-*****************
-
-.. admonition:: Reference
- :class: refbox
-
- :Panel: :menuselection:`Sidebar region --> Modifiers --> Modifiers`
-
-F-Curve modifiers are similar to object modifiers, in that they add non-destructive effects,
-that can be adjusted at any time, and layered to create more complex effects.
-
-
-Adding a Modifier
-=================
-
-.. figure:: /images/editors_graph-editor_fcurves_modifiers_panel.png
-
- Modifiers panel.
-
-The F-curve modifier panel is located in the Sidebar region.
-Select a curve by selecting one of its curve points, or by selecting the channel list.
-Click on the *Add Modifier* menu to select a modifier.
-
-
-Types of Modifiers
-==================
-
-.. index:: F-Curve Modifiers; Generator Modifier
-.. _bpy.types.FModifierGenerator:
-
-Generator Modifier
-------------------
-
-Generator creates a Factorized or Expanded Polynomial function.
-These are basic mathematical formulas that represent lines, parabolas,
-and other more complex curves, depending on the values used.
-
-Additive
- This option causes the modifier to be added to the curve, instead of replacing it by default.
-Polynomial Order
- Specify the order of the polynomial, or the highest power of ``X`` for this polynomial.
- (Number of coefficients: 1.)
-
- Change the Coefficient values to change the shape of the curve.
-
- .. seealso::
-
- `The Wikipedia Page <https://en.wikipedia.org/wiki/Polynomial>`__
- for more information on polynomials.
-
-
-.. index:: F-Curve Modifiers; Built-in Function Modifier
-.. _bpy.types.FModifierFunctionGenerator:
-
-Built-in Function Modifier
---------------------------
-
-These are additional formulas, each with the same options to control their shape.
-Consult mathematics reference for more detailed information on each function:
-
-- Sine
-- Cosine
-- Tangent
-- Square Root
-- Natural Logarithm
-- Normalized Sine (``sin(x)/x``)
-
-Amplitude
- Adjusts the Y scaling.
-Phase Multiplier
- Adjusts the X scaling.
-Phase Offset
- Adjusts the X offset.
-Value Offset
- Adjusts the Y offset.
-
-
-.. index:: F-Curve Modifiers; Envelope Modifier
-.. _bpy.types.FModifierEnvelope:
-.. _bpy.types.FModifierEnvelopeControlPoint:
-
-Envelope Modifier
------------------
-
-Allows you to adjust the overall shape of a curve with control points.
-
-Reference Value
- Set the Y value the envelope is centered around.
-Min
- Lower distance from Reference Value for ``1:1`` default influence.
-Max
- Upper distance from Reference Value for ``1:1`` default influence.
-
-Add Point
- Add a set of control points. They will be created at the current frame.
-
-Point
- Frame
- Set the frame number for the control point.
- Min
- Specifies the lower control point's position.
- Max
- Specifies the upper control point's position.
-
-
-.. index:: F-Curve Modifiers; Cycles Modifier
-.. _bpy.types.FModifierCycles:
-
-Cycles Modifier
----------------
-
-Cycles allows you add cyclic motion to a curve that has two or more control points.
-The options can be set for before and after the curve.
-
-Cycle Mode
- Repeat Motion
- Repeats the curve data, while maintaining their values each cycle.
- Repeat with Offset
- Repeats the curve data, but offsets the value of the first point to the value of the last point each cycle.
- Repeat Mirrored
- Each cycle the curve data is flipped across the X axis.
-
-Before, After Cycles
- Set the number of times to cycle the data. A value of 0 cycles the data infinitely.
-
-
-Trivially Cyclic Curves
-^^^^^^^^^^^^^^^^^^^^^^^
-
-When the *Cycle Mode* for both ends is set to either *Repeat Motion* or
-*Repeat with Offset*, and no other options of the modifier are
-changed from their defaults, it defines a simple infinite cycle.
-
-This special case receives some additional support from other areas of Blender:
-
-- Automatic Bézier handle placement is aware of the cycle and adjusts to achieve a smooth transition.
-- The :ref:`Cycle-Aware Keying <timeline-keying>` option can be enabled to take
- the cycle into account when inserting new keyframes.
-
-
-.. index:: F-Curve Modifiers; Noise Modifier
-.. _bpy.types.FModifierNoise:
-
-Noise Modifier
---------------
-
-Modifies the curve with a noise formula.
-This is useful for creating subtle or extreme randomness to animated movements,
-like camera shake.
-
-Blend Type
- Replace
- Adds a -0.5 to 0.5 range noise function to the curve.
- Add
- Adds a 0 to 1 range noise function to the curve.
- Subtract
- Subtracts a 0 to 1 range noise function to the curve.
- Multiply
- Multiplies a 0 to 1 range noise function to the curve.
-
-Scale
- Adjust the overall size of the noise. Values further from 0 give less frequent noise.
-Strength
- Adjusts the Y scaling of the noise function.
-Offset
- Offsets the noise in time.
-Phase
- Adjusts the random seed of the noise.
-Depth
- Adjusts how detailed the noise function is.
-
-
-.. index:: F-Curve Modifiers; Limits Modifier
-.. _bpy.types.FModifierLimits:
-
-Limits Modifier
----------------
-
-Limit curve values to specified X and Y ranges.
-
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-docboard-svn
mailing list