[Bf-blender-cvs] [731712aab35] temp-angavrilov: Animation: support filtering for curves that have cycle issues.
Alexander Gavrilov
noreply at git.blender.org
Thu Sep 29 19:22:18 CEST 2022
Commit: 731712aab35629199d17825442e98230e824e35d
Author: Alexander Gavrilov
Date: Mon May 3 17:27:53 2021 +0300
Branches: temp-angavrilov
https://developer.blender.org/rB731712aab35629199d17825442e98230e824e35d
Animation: support filtering for curves that have cycle issues.
It is possible to have curves with cyclic extrapolation that
have a mismatch in their end keyframes, causing a jump.
Also, since the looping behavior is defined per curve rather than at
action level, it is possible for curve loop periods to get out of
sync with each other. This commit adds an option to compare curves
against the manual frame range specified in the action, and treat
any mismatches as errors for the purpose of F-Curve filtering.
When enabled, the check verifies that end values of cyclic curves
match, curves within a cyclic action have valid cyclic extrapolation,
and the action period evenly divides by the curve period (since
a curve looping at e.g. half of the action period length still
repeats in sync with the action).
Ref: D11803
Differential Revision: https://developer.blender.org/D13349
===================================================================
M release/scripts/startup/bl_ui/space_dopesheet.py
M source/blender/blenkernel/BKE_fcurve.h
M source/blender/blenkernel/intern/fcurve.c
M source/blender/editors/animation/anim_filter.c
M source/blender/makesdna/DNA_action_types.h
M source/blender/makesrna/intern/rna_action.c
===================================================================
diff --git a/release/scripts/startup/bl_ui/space_dopesheet.py b/release/scripts/startup/bl_ui/space_dopesheet.py
index f95650ccc23..a857daa6561 100644
--- a/release/scripts/startup/bl_ui/space_dopesheet.py
+++ b/release/scripts/startup/bl_ui/space_dopesheet.py
@@ -63,6 +63,12 @@ class DopesheetFilterPopoverBase:
else: # graph and dopesheet editors - F-Curves and drivers only
col.prop(dopesheet, "show_only_errors", icon='NONE')
+ col.separator()
+
+ col2 = col.column(align=True)
+ col2.active = dopesheet.show_only_errors
+ col2.prop(dopesheet, "show_cycle_errors")
+
# Name/Membership Filters
# XXX: Perhaps these should just stay in the headers (exclusively)?
@classmethod
diff --git a/source/blender/blenkernel/BKE_fcurve.h b/source/blender/blenkernel/BKE_fcurve.h
index c11e6353bc0..2144c21d0d6 100644
--- a/source/blender/blenkernel/BKE_fcurve.h
+++ b/source/blender/blenkernel/BKE_fcurve.h
@@ -448,7 +448,7 @@ typedef enum eFCU_Cycle_Type {
/**
* Checks if the F-Curve has a Cycles modifier, and returns the type of the cycle behavior.
*/
-eFCU_Cycle_Type BKE_fcurve_get_cycle_type(struct FCurve *fcu);
+eFCU_Cycle_Type BKE_fcurve_get_cycle_type(const struct FCurve *fcu);
/**
* Recompute bezier handles of all three given BezTriples, so that `bezt` can be inserted between
diff --git a/source/blender/blenkernel/intern/fcurve.c b/source/blender/blenkernel/intern/fcurve.c
index beea3217126..0468fa5a2d3 100644
--- a/source/blender/blenkernel/intern/fcurve.c
+++ b/source/blender/blenkernel/intern/fcurve.c
@@ -1156,7 +1156,7 @@ void fcurve_samples_to_keyframes(FCurve *fcu, const int start, const int end)
* that the handles are correct.
*/
-eFCU_Cycle_Type BKE_fcurve_get_cycle_type(FCurve *fcu)
+eFCU_Cycle_Type BKE_fcurve_get_cycle_type(const FCurve *fcu)
{
FModifier *fcm = fcu->modifiers.first;
diff --git a/source/blender/editors/animation/anim_filter.c b/source/blender/editors/animation/anim_filter.c
index e0df7328c74..222e7708bd7 100644
--- a/source/blender/editors/animation/anim_filter.c
+++ b/source/blender/editors/animation/anim_filter.c
@@ -63,6 +63,7 @@
#include "BLI_alloca.h"
#include "BLI_blenlib.h"
#include "BLI_ghash.h"
+#include "BLI_math.h"
#include "BLI_string.h"
#include "BLI_utildefines.h"
@@ -1202,6 +1203,53 @@ static bool skip_fcurve_with_name(
return true;
}
+/* Check if the F-Curve doesn't cycle properly based on action settings. */
+static bool fcurve_has_cycle_errors(const FCurve *fcu, const bAction *act)
+{
+ /* Check if the curve is cyclic. */
+ const eFCU_Cycle_Type cycle_type = BKE_fcurve_get_cycle_type(fcu);
+
+ if (cycle_type == FCU_CYCLE_NONE) {
+ /* Curves in a cyclic action should be cyclic; in an ordinary action either way is fine. */
+ return BKE_action_is_cyclic(act);
+ }
+
+ /* Check if the curve has enough points. */
+ if (fcu->totvert < 2 || !fcu->bezt) {
+ return true;
+ }
+
+ const BezTriple *first = &fcu->bezt[0], *last = &fcu->bezt[fcu->totvert - 1];
+
+ if (BKE_action_is_cyclic(act)) {
+ /* Check that it has a nonzero period length. */
+ const float curve_period = last->vec[1][0] - first->vec[1][0];
+
+ if (curve_period < 0.1f) {
+ return true;
+ }
+
+ /* Check that the action period is divisible by the curve period. */
+ const float action_period = act->frame_end - act->frame_start;
+ const float gap = action_period - roundf(action_period / curve_period) * curve_period;
+
+ if (fabsf(gap) > 1e-3f) {
+ return true;
+ }
+ }
+
+ /* In case of a perfect cycle, check that the start and end values match. */
+ if (cycle_type == FCU_CYCLE_PERFECT) {
+ const float magnitude = max_fff(fabsf(first->vec[1][1]), fabsf(last->vec[1][1]), 0.01f);
+
+ if (fabsf(first->vec[1][1] - last->vec[1][1]) > magnitude * 1e-4f) {
+ return true;
+ }
+ }
+
+ return false;
+}
+
/**
* Check if F-Curve has errors and/or is disabled
*
@@ -1248,6 +1296,7 @@ static FCurve *animfilter_fcurve_next(bDopeSheet *ads,
FCurve *first,
eAnim_ChannelType channel_type,
int filter_mode,
+ bAction *act,
void *owner,
ID *owner_id)
{
@@ -1299,7 +1348,9 @@ static FCurve *animfilter_fcurve_next(bDopeSheet *ads,
/* error-based filtering... */
if ((ads) && (ads->filterflag & ADS_FILTER_ONLY_ERRORS)) {
/* skip if no errors... */
- if (fcurve_has_errors(fcu) == false) {
+ if (fcurve_has_errors(fcu) == false &&
+ !((ads->filterflag & ADS_FILTER_CYCLE_ERRORS) &&
+ fcurve_has_cycle_errors(fcu, act))) {
continue;
}
}
@@ -1321,6 +1372,7 @@ static size_t animfilter_fcurves(ListBase *anim_data,
FCurve *first,
eAnim_ChannelType fcurve_type,
int filter_mode,
+ bAction *act,
void *owner,
ID *owner_id,
ID *fcurve_owner_id)
@@ -1341,7 +1393,7 @@ static size_t animfilter_fcurves(ListBase *anim_data,
* Back to step 2 :)
*/
for (fcu = first;
- (fcu = animfilter_fcurve_next(ads, fcu, fcurve_type, filter_mode, owner, owner_id));
+ (fcu = animfilter_fcurve_next(ads, fcu, fcurve_type, filter_mode, act, owner, owner_id));
fcu = fcu->next) {
if (UNLIKELY(fcurve_type == ANIMTYPE_NLACURVE)) {
/* NLA Control Curve - Basically the same as normal F-Curves,
@@ -1416,11 +1468,18 @@ static size_t animfilter_act_group(bAnimContext *ac,
if (!(filter_mode & ANIMFILTER_FOREDIT) || EDITABLE_AGRP(agrp)) {
/* get first F-Curve which can be used here */
FCurve *first_fcu = animfilter_fcurve_next(
- ads, agrp->channels.first, ANIMTYPE_FCURVE, filter_mode, agrp, owner_id);
+ ads, agrp->channels.first, ANIMTYPE_FCURVE, filter_mode, act, agrp, owner_id);
/* filter list, starting from this F-Curve */
- tmp_items += animfilter_fcurves(
- &tmp_data, ads, first_fcu, ANIMTYPE_FCURVE, filter_mode, agrp, owner_id, &act->id);
+ tmp_items += animfilter_fcurves(&tmp_data,
+ ads,
+ first_fcu,
+ ANIMTYPE_FCURVE,
+ filter_mode,
+ act,
+ agrp,
+ owner_id,
+ &act->id);
}
}
}
@@ -1485,7 +1544,7 @@ static size_t animfilter_action(bAnimContext *ac,
if (!(filter_mode & ANIMFILTER_ACTGROUPED)) {
FCurve *firstfcu = (lastchan) ? (lastchan->next) : (act->curves.first);
items += animfilter_fcurves(
- anim_data, ads, firstfcu, ANIMTYPE_FCURVE, filter_mode, NULL, owner_id, &act->id);
+ anim_data, ads, firstfcu, ANIMTYPE_FCURVE, filter_mode, act, NULL, owner_id, &act->id);
}
/* return the number of items added to the list */
@@ -1618,6 +1677,7 @@ static size_t animfilter_nla_controls(
strip->fcurves.first,
ANIMTYPE_NLACURVE,
filter_mode,
+ NULL,
strip,
owner_id,
owner_id);
@@ -1674,8 +1734,15 @@ static size_t animfilter_block_data(
items += animfilter_nla(ac, anim_data, ads, adt, filter_mode, id);
},
{ /* Drivers */
- items += animfilter_fcurves(
- anim_data, ads, adt->drivers.first, ANIMTYPE_FCURVE, filter_mode, NULL, id, id);
+ items += animfilter_fcurves(anim_data,
+ ads,
+ adt->drivers.first,
+ ANIMTYPE_FCURVE,
+ filter_mode,
+ NULL,
+ NULL,
+ id,
+ id);
},
{ /* NLA Control Keyframes */
items += animfilter_nla_controls(anim_data, ads, adt, filter_mode, id);
diff --git a/source/blender/makesdna/DNA_action_types.h b/source/blender/makesdna/DNA_action_types.h
index 53e87e905b5..bf98fb0766d 100644
--- a/source/blender/makesdna/DNA_action_types.h
+++ b/source/blender/makesdna/DNA_action_types.h
@@ -776,6 +776,8 @@ typedef enum eDopeSheet_FilterFlag {
ADS_FILTER_INCL_HIDDEN = (1 << 26),
/** show only F-Curves which are disabled/have errors - for debugging drivers */
ADS_FILTER_ONLY_ERRORS = (1 << 28),
+ /** treat cyclic extrapolation issues as errors for the previous option */
+ ADS_FILTER_CYCLE_ERRORS = (1 << 29),
#if 0
/** combination filters (some only used at runtime) */
diff --git a/source/blender/makesrna/intern/rna_action.c b/source/blender/makesrna/intern/rna_action.c
index 14f4a82c62b..981cc694e27 100644
--- a/source/blender/makesrna/intern/rna_action.c
+++ b/source/blender/makesrna/intern/rna_action.c
@@ -420,6 +420,17 @@ static void rna_def_dopesheet(BlenderRNA *brna)
RNA_def_property_ui_icon(prop, ICON_ERROR, 0);
RNA_def_property_update(prop, NC_ANIMATION | ND_ANIMCHAN | NA_EDITED, NULL);
+ prop = RNA_def_property(srna, "show_cycle_errors", PROP_BOOLEAN, PROP_NONE);
+ RNA_def_property_boolean_sdna(prop, NULL, "filterflag", ADS_FILTER_CYCLE_ERRORS);
+ RNA_def_property_ui_text(
+ prop,
+ "Cyclic Extrapolation Issues",
+ "Treat cyclic extrapolation issues as errors for the Only Show Errors option, detecting "
+
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-blender-cvs
mailing list