[Bf-blender-cvs] [c4ab1891ccc] master: Automated testing: selection operators test cases
Habib Gahbiche
noreply at git.blender.org
Sat Mar 27 09:51:05 CET 2021
Commit: c4ab1891ccc5ecca876e48dcd1a509ebfd60a427
Author: Habib Gahbiche
Date: Sat Jan 30 22:42:21 2021 +0100
Branches: master
https://developer.blender.org/rBc4ab1891ccc5ecca876e48dcd1a509ebfd60a427
Automated testing: selection operators test cases
added 22 more test cases for following operators:
- edges select sharp
- loop multi select
- select all
- select faces by sides
- select interior faces
- select less
- select linked
{F9853218}
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10400
===================================================================
M tests/python/operators.py
===================================================================
diff --git a/tests/python/operators.py b/tests/python/operators.py
index 461880ec214..309a872ac67 100644
--- a/tests/python/operators.py
+++ b/tests/python/operators.py
@@ -137,7 +137,6 @@ def main():
MeshTest("CubeEdgeSplit", "testCubeEdgeSplit", "expectedCubeEdgeSplit",
[OperatorSpecEditMode("edge_split", {}, "EDGE", {2, 5, 8, 11, 14, 17, 20, 23})]),
- ### 25
# edge ring select - Cannot be tested. Need user input.
# MeshTest("CubeEdgeRingSelect", "testCubeEdgeRingSelect", "expectedCubeEdgeRingSelect",
# [OperatorSpecEditMode("edgering_select", {}, "EDGE", {5, 20, 25, 26})]),
@@ -146,6 +145,16 @@ def main():
# MeshTest("EmptyMeshEdgeRingSelect", "testEmptyMeshdgeRingSelect", "expectedEmptyMeshEdgeRingSelect",
# [OperatorSpecEditMode("edgering_select", {}, "VERT", {})]),
+ # edges select sharp
+ MeshTest("CubeEdgesSelectSharp", "testCubeEdgeSelectSharp", "expectedCubeEdgeSelectSharp",
+ [OperatorSpecEditMode("edges_select_sharp", {}, "EDGE", {20})]),
+ MeshTest("SphereEdgesSelectSharp", "testSphereEdgesSelectSharp", "expectedSphereEdgeSelectSharp",
+ [OperatorSpecEditMode("edges_select_sharp", {"sharpness": 0.25}, "EDGE", {288})]),
+ MeshTest("HoledSphereEdgesSelectSharp", "testHoledSphereEdgesSelectSharp", "expectedHoledSphereEdgeSelectSharp",
+ [OperatorSpecEditMode("edges_select_sharp", {"sharpness": 0.18}, "VERT", {})]),
+ MeshTest("EmptyMeshEdgesSelectSharp", "testEmptyMeshEdgeSelectSharp", "expectedEmptyMeshEdgeSelectSharp",
+ [OperatorSpecEditMode("edges_select_sharp", {}, "VERT", {})]),
+
# face make planar
MeshTest("MonkeyFaceMakePlanar", "testMonkeyFaceMakePlanar",
"expectedMonkeyFaceMakePlanar",
@@ -208,6 +217,85 @@ def main():
[OperatorSpecEditMode("inset", {"thickness": 0.4,
"use_relative_offset": True}, "FACE",
{35, 36, 37, 45, 46, 47, 55, 56, 57})]),
+
+ # loop multi select
+ MeshTest("MokeyLoopMultiSelect", "testMonkeyLoopMultiSelect", "expectedMonkeyLoopMultiSelect",
+ [OperatorSpecEditMode("loop_multi_select", {}, "VERT", {355, 359, 73, 301, 302})]),
+ MeshTest("HoledGridLoopMultiSelect", "testGridLoopMultiSelect", "expectedGridLoopMultiSelect",
+ [OperatorSpecEditMode("loop_multi_select", {}, "VERT", {257, 169, 202, 207, 274, 278, 63})]),
+ MeshTest("EmptyMeshLoopMultiSelect", "testEmptyMeshLoopMultiSelect", "expectedEmptyMeshLoopMultiSelect",
+ [OperatorSpecEditMode("loop_multi_select", {}, "VERT", {})]),
+
+ # select all
+ MeshTest("CircleSelectAll", "testCircleSelectAll", "expectedCircleSelectAll",
+ [OperatorSpecEditMode("select_all", {}, "VERT", {1})]),
+ MeshTest("IsolatedVertsSelectAll", "testIsolatedVertsSelectAll", "expectedIsolatedVertsSelectAll",
+ [OperatorSpecEditMode("select_all", {}, "VERT", {})]),
+ MeshTest("EmptyMeshSelectAll", "testEmptyMeshSelectAll", "expectedEmptyMeshSelectAll",
+ [OperatorSpecEditMode("select_all", {}, "VERT", {})]),
+
+ # select axis - Cannot be tested. Needs active vert selection
+ # MeshTest("MonkeySelectAxisX", "testMonkeySelectAxisX", "expectedMonkeySelectAxisX",
+ # [OperatorSpecEditMode("select_axis", {"axis": "X"}, "VERT", {13})]),
+ # MeshTest("MonkeySelectAxisY", "testMonkeySelectAxisY", "expectedMonkeySelectAxisY",
+ # [OperatorSpecEditMode("select_axis", {"axis": "Y", "sign": "NEG"}, "FACE", {317})]),
+ # MeshTest("MonkeySelectAxisXYZ", "testMonkeySelectAxisXYZ", "expectedMonkeySelectAxisXYZ",
+ # [OperatorSpecEditMode("select_axis", {"axis": "X", "sign": "NEG"}, "FACE", {317}),
+ # OperatorSpecEditMode("select_axis", {"axis": "Y", "sign": "POS"}, "FACE", {}),
+ # OperatorSpecEditMode("select_axis", {"axis": "Z", "sign": "NEG"}, "FACE", {})]),
+
+ # select faces by sides
+ MeshTest("CubeSelectFacesBySide", "testCubeSelectFacesBySide", "expectedCubeSelectFacesBySide",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4}, "FACE", {})]),
+ MeshTest("CubeSelectFacesBySideGreater", "testCubeSelectFacesBySideGreater", "expectedCubeSelectFacesBySideGreater",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4, "type": "GREATER", "extend": True}, "FACE", {})]),
+ MeshTest("CubeSelectFacesBySideLess", "testCubeSelectFacesBySideLess", "expectedCubeSelectFacesBySideLess",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4, "type": "GREATER", "extend": True}, "FACE", {})]),
+
+ # select interior faces
+ MeshTest("CubeSelectInteriorFaces", "testCubeSelectInteriorFaces", "expectedCubeSelectInteriorFaces",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4}, "FACE", {})]),
+ MeshTest("HoledCubeSelectInteriorFaces", "testHoledCubeSelectInteriorFaces", "expectedHoledCubeSelectInteriorFaces",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4}, "FACE", {})]),
+ MeshTest("EmptyMeshSelectInteriorFaces", "testEmptyMeshSelectInteriorFaces", "expectedEmptyMeshSelectInteriorFaces",
+ [OperatorSpecEditMode("select_face_by_sides", {"number": 4}, "FACE", {})]),
+
+ # select less
+ MeshTest("MonkeySelectLess", "testMonkeySelectLess", "expectedMonkeySelectLess",
+ [OperatorSpecEditMode("select_less", {}, "VERT", {2, 8, 24, 34, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 68,
+ 69, 70, 71, 74, 75, 78, 80, 81, 82, 83, 90, 91, 93, 95, 97, 99,
+ 101, 109, 111, 115, 117, 119, 121, 123, 125, 127, 129, 130, 131,
+ 132, 133, 134, 135, 136, 138, 141, 143, 145, 147, 149, 151, 153,
+ 155, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174,
+ 175, 176, 177, 178, 181, 182, 184, 185, 186, 187, 188, 189, 190,
+ 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204,
+ 206, 207, 208, 210, 216, 217, 218, 219, 220, 221, 222, 229, 230,
+ 231, 233, 235, 237, 239, 241, 243, 245, 247, 249, 251, 253, 255,
+ 257, 259, 263, 267, 269, 271, 275, 277, 289, 291, 293, 295, 309,
+ 310, 311, 312, 316, 317, 318, 319, 320, 323, 325, 327, 329, 331,
+ 341, 347, 349, 350, 351, 354, 356, 359, 361, 363, 365, 367, 369,
+ 375, 379, 381, 382, 385, 386, 387, 388, 389, 390, 391, 392, 393,
+ 394, 395, 396, 397, 398, 399, 400, 401, 402, 403, 404, 405, 406,
+ 407, 408, 409, 410, 411, 412, 413, 414, 415, 416, 417, 418, 419,
+ 420, 421, 423, 425, 426, 427, 428, 429, 430, 431, 432, 433, 434,
+ 435, 436, 437, 438, 439, 440, 441, 442, 443, 444, 445, 446, 447,
+ 448, 449, 450, 451, 452, 454, 455, 456, 457, 458, 459, 460, 461,
+ 462, 463, 464, 471, 473, 474, 475, 476, 477, 478, 479, 480, 481,
+ 482, 483, 484, 485, 486, 487, 488, 489, 490, 491, 492, 493, 495,
+ 496, 497, 498, 499, 502, 505})]),
+ MeshTest("HoledCubeSelectLess", "testHoledCubeSelectLess", "expectedHoledCubeSelectLess",
+ [OperatorSpecEditMode("select_face_by_sides", {}, "FACE", {})]),
+ MeshTest("EmptyMeshSelectLess", "testEmptyMeshSelectLess", "expectedEmptyMeshSelectLess",
+ [OperatorSpecEditMode("select_face_by_sides", {}, "VERT", {})]),
+
+ # select linked
+ MeshTest("PlanesSelectLinked", "testPlanesSelectLinked", "expectedPlanesSelectedLinked",
+ [OperatorSpecEditMode("select_linked", {}, "VERT", {7})]),
+ MeshTest("CubesSelectLinked", "testCubesSelectLinked", "expectedCubesSelectLinked",
+ [OperatorSpecEditMode("select_linked", {}, "VERT", {11})]),
+ MeshTest("EmptyMeshSelectLinked", "testEmptyMeshSelectLinked", "expectedEmptyMeshSelectLinked",
+ [OperatorSpecEditMode("select_linked", {}, "VERT", {})]),
+
]
operators_test = RunTest(tests)
More information about the Bf-blender-cvs
mailing list