[Bf-blender-cvs] [1538f52] master: Docs: update doxy config

[Campbell Barton]

Commit: 1538f526e9fbd011ff9e1ebd325862819bec85cf
Author: Campbell Barton
Date:   Sun Feb 14 22:11:35 2016 +1100
Branches: master
https://developer.blender.org/rB1538f526e9fbd011ff9e1ebd325862819bec85cf

Docs: update doxy config

===================================================================

M	doc/doxygen/Doxyfile

===================================================================

diff --git a/doc/doxygen/Doxyfile b/doc/doxygen/Doxyfile
index 4a5a2c3..b34d4df 100644
--- a/doc/doxygen/Doxyfile
+++ b/doc/doxygen/Doxyfile
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.9.1
+# Doxyfile 1.8.11
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -353,6 +353,13 @@ IDL_PROPERTY_SUPPORT   = YES
 
 DISTRIBUTE_GROUP_DOC   = NO
 
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
 # (for instance a group of public functions) to be put as a subgroup of that
 # type (e.g. under the Public Functions section). Set it to NO to prevent
@@ -742,6 +749,12 @@ WARN_IF_DOC_ERROR      = YES
 
 WARN_NO_PARAMDOC       = NO
 
+# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+# a warning is encountered.
+# The default value is: NO.
+
+WARN_AS_ERROR          = NO
+
 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
 # can produce. The string should contain the $file, $line, and $text tags, which
 # will be replaced by the file and line number from which the warning originated
@@ -765,7 +778,7 @@ WARN_LOGFILE           =
 # The INPUT tag is used to specify the files and/or directories that contain
 # documented source files. You may enter file names like myfile.cpp or
 # directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
 INPUT                  = doxygen.main.h \
@@ -787,12 +800,17 @@ INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
+# *.h) to filter out the source-files in the directories.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# read by doxygen.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl,
+# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js.
 
 FILE_PATTERNS          =
 
@@ -881,6 +899,10 @@ IMAGE_PATH             =
 # Note that the filter must not add or remove lines; it is applied before the
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 INPUT_FILTER           =
 
@@ -890,6 +912,10 @@ INPUT_FILTER           =
 # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
 # patterns match the file name, INPUT_FILTER is applied.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 FILTER_PATTERNS        =
 
@@ -913,7 +939,7 @@ FILTER_SOURCE_PATTERNS =
 # (index.html). This can be useful if you have a project on for instance GitHub
 # and want to reuse the introduction page also for the doxygen output.
 
-# USE_MDFILE_AS_MAINPAGE =
+USE_MDFILE_AS_MAINPAGE =
 
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
@@ -1148,8 +1174,9 @@ HTML_COLORSTYLE_GAMMA  = 79
 
 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
+# to YES can help to show when doxygen was last run and thus if the
+# documentation is up to date.
+# The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_TIMESTAMP         = YES
@@ -1623,9 +1650,12 @@ COMPACT_LATEX          = NO
 PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
+# that should be included in the LaTeX output. The package can be specified just
+# by its name or with the correct syntax as to be used with the LaTeX
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
 # If left blank no extra packages will be included.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1728,6 +1758,14 @@ LATEX_SOURCE_CODE      = NO
 
 LATEX_BIB_STYLE        = plain
 
+# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_TIMESTAMP        = NO
+
 #---------------------------------------------------------------------------
 # Configuration options related to the RTF output
 #---------------------------------------------------------------------------
@@ -2227,7 +2265,8 @@ INCLUDED_BY_GRAPH      = NO
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2238,7 +2277,8 @@ CALL_GRAPH             = NO
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2261,11 +2301,15 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif and svg.
+# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.