[Bf-blender-cvs] [5674ac9] master: Cleanup identation and fix a bad alignment issue in last commit
Antony Riakiotakis
noreply at git.blender.org
Mon Nov 17 16:12:25 CET 2014
Commit: 5674ac9b7e47015d80628bd5b96af345ccd37e95
Author: Antony Riakiotakis
Date: Mon Nov 17 16:12:07 2014 +0100
Branches: master
https://developer.blender.org/rB5674ac9b7e47015d80628bd5b96af345ccd37e95
Cleanup identation and fix a bad alignment issue in last commit
===================================================================
M source/blender/windowmanager/intern/wm_operators.c
===================================================================
diff --git a/source/blender/windowmanager/intern/wm_operators.c b/source/blender/windowmanager/intern/wm_operators.c
index dd19a41..4052b56 100644
--- a/source/blender/windowmanager/intern/wm_operators.c
+++ b/source/blender/windowmanager/intern/wm_operators.c
@@ -3751,22 +3751,22 @@ typedef struct {
ListBase orig_paintcursors;
bool use_secondary_tex;
void *cursor;
- NumInput num_input;
+ NumInput num_input;
} RadialControl;
static void radial_control_update_header(wmOperator *op, bContext *C)
{
- RadialControl *rc = op->customdata;
- char msg[WM_RADIAL_CONTROL_HEADER_LENGTH];
- ScrArea *sa = CTX_wm_area(C);
- Scene *scene = CTX_data_scene(C);
+ RadialControl *rc = op->customdata;
+ char msg[WM_RADIAL_CONTROL_HEADER_LENGTH];
+ ScrArea *sa = CTX_wm_area(C);
+ Scene *scene = CTX_data_scene(C);
- if (sa && hasNumInput(&rc->num_input)) {
- char num_str[NUM_STR_REP_LEN];
- outputNumInput(&rc->num_input, num_str, &scene->unit);
- BLI_snprintf(msg, WM_RADIAL_CONTROL_HEADER_LENGTH, "%s: %s", RNA_property_ui_name(rc->prop), num_str);
- ED_area_headerprint(sa, msg);
- }
+ if (sa && hasNumInput(&rc->num_input)) {
+ char num_str[NUM_STR_REP_LEN];
+ outputNumInput(&rc->num_input, num_str, &scene->unit);
+ BLI_snprintf(msg, WM_RADIAL_CONTROL_HEADER_LENGTH, "%s: %s", RNA_property_ui_name(rc->prop), num_str);
+ ED_area_headerprint(sa, msg);
+ }
}
static void radial_control_set_initial_mouse(RadialControl *rc, const wmEvent *event)
@@ -4153,12 +4153,12 @@ static int radial_control_invoke(bContext *C, wmOperator *op, const wmEvent *eve
return OPERATOR_CANCELLED;
}
- /* initialize numerical input */
- initNumInput(&rc->num_input);
- rc->num_input.idx_max = 0;
- rc->num_input.val_flag[0] |= NUM_NO_NEGATIVE;
- rc->num_input.unit_sys = USER_UNIT_NONE;
- rc->num_input.unit_type[0] = B_UNIT_LENGTH;
+ /* initialize numerical input */
+ initNumInput(&rc->num_input);
+ rc->num_input.idx_max = 0;
+ rc->num_input.val_flag[0] |= NUM_NO_NEGATIVE;
+ rc->num_input.unit_sys = USER_UNIT_NONE;
+ rc->num_input.unit_type[0] = B_UNIT_LENGTH;
/* get subtype of property */
rc->subtype = RNA_property_subtype(rc->prop);
@@ -4211,9 +4211,9 @@ static void radial_control_cancel(bContext *C, wmOperator *op)
rc->dial = NULL;
}
- if (sa) {
- ED_area_headerprint(sa, NULL);
- }
+ if (sa) {
+ ED_area_headerprint(sa, NULL);
+ }
WM_paint_cursor_end(wm, rc->cursor);
@@ -4244,163 +4244,166 @@ static int radial_control_modal(bContext *C, wmOperator *op, const wmEvent *even
snap = event->ctrl != 0;
- /* Modal numinput active, try to handle numeric inputs first... */
- if (event->val == KM_PRESS && has_numInput && handleNumInput(C, &rc->num_input, event)) {
- handled = true;
- applyNumInput(&rc->num_input, &numValue);
- CLAMP(numValue, rc->min_value, rc->max_value);
- new_value = numValue;
-
- radial_control_set_value(rc, new_value);
- rc->current_value = new_value;
- radial_control_update_header(op, C);
- return OPERATOR_RUNNING_MODAL;
- }
- else {
- handled = false;
- switch (event->type) {
- case ESCKEY:
- case RIGHTMOUSE:
- /* canceled; restore original value */
- radial_control_set_value(rc, rc->initial_value);
- ret = OPERATOR_CANCELLED;
- break;
-
- case LEFTMOUSE:
- case PADENTER:
- case RETKEY:
- /* done; value already set */
- RNA_property_update(C, &rc->ptr, rc->prop);
- ret = OPERATOR_FINISHED;
- break;
-
- case MOUSEMOVE:
- if (!has_numInput) {
- if (rc->slow_mode) {
- if (rc->subtype == PROP_ANGLE) {
- float position[2] = {event->x, event->y};
-
- /* calculate the initial angle here first */
- delta[0] = rc->initial_mouse[0] - rc->slow_mouse[0];
- delta[1] = rc->initial_mouse[1] - rc->slow_mouse[1];
-
- /* precision angle gets calculated from dial and gets added later */
- angle_precision = -0.1f * BLI_dial_angle(rc->dial, position);
- }
- else {
- delta[0] = rc->initial_mouse[0] - rc->slow_mouse[0];
- delta[1] = rc->initial_mouse[1] - rc->slow_mouse[1];
-
- if (rc->zoom_prop) {
- RNA_property_float_get_array(&rc->zoom_ptr, rc->zoom_prop, zoom);
- delta[0] /= zoom[0];
- delta[1] /= zoom[1];
- }
-
- dist = len_v2(delta);
-
- delta[0] = event->x - rc->slow_mouse[0];
- delta[1] = event->y - rc->slow_mouse[1];
-
- if (rc->zoom_prop) {
- delta[0] /= zoom[0];
- delta[1] /= zoom[1];
- }
-
- dist = dist + 0.1f * (delta[0] + delta[1]);
- }
- }
- else {
- delta[0] = rc->initial_mouse[0] - event->x;
- delta[1] = rc->initial_mouse[1] - event->y;
-
- if (rc->zoom_prop) {
- RNA_property_float_get_array(&rc->zoom_ptr, rc->zoom_prop, zoom);
- delta[0] /= zoom[0];
- delta[1] /= zoom[1];
- }
-
- dist = len_v2(delta);
- }
-
- /* calculate new value and apply snapping */
- switch (rc->subtype) {
- case PROP_NONE:
- case PROP_DISTANCE:
- case PROP_PERCENTAGE:
- case PROP_PIXEL:
- new_value = dist;
- if (snap) new_value = ((int)new_value + 5) / 10 * 10;
- break;
- case PROP_FACTOR:
- new_value = (WM_RADIAL_CONTROL_DISPLAY_SIZE - dist) / WM_RADIAL_CONTROL_DISPLAY_WIDTH;
- if (snap) new_value = ((int)ceil(new_value * 10.f) * 10.0f) / 100.f;
- break;
- case PROP_ANGLE:
- new_value = atan2f(delta[1], delta[0]) + M_PI + angle_precision;
- new_value = fmod(new_value, 2.0f * (float)M_PI);
- if (new_value < 0.0f)
- new_value += 2.0f * (float)M_PI;
- if (snap) new_value = DEG2RADF(((int)RAD2DEGF(new_value) + 5) / 10 * 10);
- break;
- default:
- new_value = dist; /* dummy value, should this ever happen? - campbell */
- break;
- }
-
- /* clamp and update */
- CLAMP(new_value, rc->min_value, rc->max_value);
- radial_control_set_value(rc, new_value);
- rc->current_value = new_value;
- handled = true;
- break;
-
- case LEFTSHIFTKEY:
- case RIGHTSHIFTKEY:
- if (event->val == KM_PRESS) {
- rc->slow_mouse[0] = event->x;
- rc->slow_mouse[1] = event->y;
- rc->slow_mode = true;
- if (rc->subtype == PROP_ANGLE) {
- float initial_position[2] = {UNPACK2(rc->initial_mouse)};
- float current_position[2] = {UNPACK2(rc->slow_mouse)};
- rc->dial = BLI_dial_initialize(initial_position, 0.0f);
- /* immediately set the position to get a an initial direction */
- BLI_dial_angle(rc->dial, current_position);
- }
- handled = true;
- }
- if (event->val == KM_RELEASE) {
- rc->slow_mode = false;
- handled = true;
- if (rc->dial) {
- MEM_freeN(rc->dial);
- rc->dial = NULL;
- }
- }
- break;
- }
- }
-
- /* Modal numinput inactive, try to handle numeric inputs last... */
- if (!handled && event->val == KM_PRESS && handleNumInput(C, &rc->num_input, event)) {
- applyNumInput(&rc->num_input, &numValue);
- CLAMP(numValue, rc->min_value, rc->max_value);
- new_value = numValue;
-
- radial_control_set_value(rc, new_value);
- rc->current_value = new_value;
- radial_control_update_header(op, C);
- return OPERATOR_RUNNING_MODAL;
- }
- }
-
- ED_region_tag_redraw(CTX_wm_region(C));
-
- if (ret != OPERATOR_RUNNING_MODAL)
- radial_control_cancel(C, op);
-
- return ret;
+ /* Modal numinput active, try to handle numeric inputs first... */
+ if (event->val == KM_PRESS && has_numInput && handleNumInput(C, &rc->num_input, event)) {
+ handled = true;
+ applyNumInput(&rc->num_input, &numValue);
+ CLAMP(numValue, rc->min_value, rc->max_value);
+ new_value = numValue;
+
+ radial_control_set_value(rc, new_value);
+ rc->current_value = new_value;
+ radial_control_update_header(op, C);
+ return OPERATOR_RUNNING_MODAL;
+ }
+ else {
+ handled = false;
+ switch (event->type) {
+ case ESCKEY:
+ case RIGHTMOUSE:
+ /* canceled; restore original value */
+ radial_control_set_value(rc, rc->initial_value);
+ ret = OPERATOR_CANCELLED;
+ break;
+
+ case LEFTMOUSE:
+ case PADENTER:
+ case RETKEY:
+ /* done; value already set */
+ RNA_property_update(C, &rc->ptr, rc->prop);
+ ret = OPERATOR_FINISHED;
+ break;
+
+ case MOUSEMOVE:
+ if (!has_numInput) {
+ if (rc->slow_mode) {
+ if (rc->subtype == PROP_ANGLE) {
+ float position[2] = {event->x, event->y};
+
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-blender-cvs
mailing list