[Bf-blender-cvs] [a502959] master: Bevel: fixed problems with vertex bevel and some 'weld' cases.

[Howard Trickey]

Commit: a502959e4bfac258146c4fd1fe622468ec3779c1
Author: Howard Trickey
Date:   Mon Jan 20 08:48:55 2014 -0500
https://developer.blender.org/rBa502959e4bfac258146c4fd1fe622468ec3779c1

Bevel: fixed problems with vertex bevel and some 'weld' cases.

Vertex bevel was completely messed up after last change,
and this fixes.
'Weld' bevels, where there are exactly two beveled edges
meeting at a vertex, now look better in cases where one
of the beveled edges is on a flat plane.

===================================================================

M	source/blender/bmesh/tools/bmesh_bevel.c

===================================================================

diff --git a/source/blender/bmesh/tools/bmesh_bevel.c b/source/blender/bmesh/tools/bmesh_bevel.c
index 9f2a71e..8ae71c2 100644
--- a/source/blender/bmesh/tools/bmesh_bevel.c
+++ b/source/blender/bmesh/tools/bmesh_bevel.c
@@ -882,6 +882,8 @@ static void set_profile_params(BevelParams *bp, BoundVert *bndv)
 				/* whole profile is collinear with edge: just interpolate */
 				do_linear_interp = true;
 			}
+			/* signal to weld that this is linear */
+			pro->super_r = PRO_LINE_R;
 		}
 		copy_v3_v3(pro->plane_co, co1);
 	}
@@ -902,7 +904,9 @@ static void move_profile_plane(BoundVert *bndv, EdgeHalf *e1, EdgeHalf *e2)
 {
 	float d1[3], d2[3], no[3], no2[3], dot;
 
-	/* only do this if e1, e2, and proj_dir are not coplanar */
+	/* only do this if projecting, and e1, e2, and proj_dir are not coplanar */
+	if (is_zero_v3(bndv->profile.proj_dir))
+		return;
 	sub_v3_v3v3(d1, e1->e->v1->co, e1->e->v2->co);
 	sub_v3_v3v3(d2, e2->e->v1->co, e2->e->v2->co);
 	cross_v3_v3v3(no, d1, d2);
@@ -921,16 +925,27 @@ static void move_profile_plane(BoundVert *bndv, EdgeHalf *e1, EdgeHalf *e2)
  * The original vertex should form a third point of the desired plane. */
 static void move_weld_profile_planes(BevVert *bv, BoundVert *bndv1, BoundVert *bndv2)
 {
-	float d1[3], d2[3], no[3], no2[3], dot;
+	float d1[3], d2[3], no[3], no2[3], no3[3], dot1, dot2;
 
-	/* only do this if d1, d2, and proj_dir are not coplanar */
+	/* only do this if projecting, and d1, d2, and proj_dir are not coplanar */
+	if (is_zero_v3(bndv1->profile.proj_dir) || is_zero_v3(bndv2->profile.proj_dir))
+		return;
 	sub_v3_v3v3(d1, bv->v->co, bndv1->nv.co);
 	sub_v3_v3v3(d2, bv->v->co, bndv2->nv.co);
 	cross_v3_v3v3(no, d1, d2);
+	/* "no" is new normal projection plane, but don't move if
+	 * it is coplanar with one or the other of the projection dirs */
 	cross_v3_v3v3(no2, d1, bndv1->profile.proj_dir);
-	if (normalize_v3(no) > BEVEL_EPSILON && normalize_v3(no2)) {
-		dot = fabsf(dot_v3v3(no, no2));
-		if (fabsf(dot - 1.0f) > BEVEL_EPSILON) {
+	cross_v3_v3v3(no3, d2, bndv2->profile.proj_dir);
+	if (normalize_v3(no) > BEVEL_EPSILON &&
+	    normalize_v3(no2) > BEVEL_EPSILON &&
+	    normalize_v3(no3) > BEVEL_EPSILON)
+	{
+		dot1 = fabsf(dot_v3v3(no, no2));
+		dot2 = fabsf(dot_v3v3(no, no3));
+		if (fabsf(dot1 - 1.0f) > BEVEL_EPSILON &&
+		    fabsf(dot2 - 1.0f) > BEVEL_EPSILON)
+		{
 			copy_v3_v3(bndv1->profile.plane_no, no);
 			copy_v3_v3(bndv2->profile.plane_no, no);
 		}
@@ -1126,9 +1141,14 @@ static void get_profile_point(const Profile *pro, float u, float r_co[3])
 		}
 	}
 	/* project co onto final profile plane */
-	add_v3_v3v3(co2, co, pro->proj_dir);
-	if (!isect_line_plane_v3(r_co, co, co2, pro->plane_co, pro->plane_no)) {
-		/* shouldn't happen */
+	if (!is_zero_v3(pro->proj_dir)) {
+		add_v3_v3v3(co2, co, pro->proj_dir);
+		if (!isect_line_plane_v3(r_co, co, co2, pro->plane_co, pro->plane_no)) {
+			/* shouldn't happen */
+			copy_v3_v3(r_co, co);
+		}
+	}
+	else {
 		copy_v3_v3(r_co, co);
 	}
 }
@@ -2960,7 +2980,16 @@ static void build_vmesh(BevelParams *bp, BMesh *bm, BevVert *bv)
 		for (k = 1; k < ns; k++) {
 			va = mesh_vert(vm, weld1->index, 0, k)->co;
 			vb = mesh_vert(vm, weld2->index, 0, ns - k)->co;
-			mid_v3_v3v3(co, va, vb);
+			/* if one of the profiles is on a flat plane,
+			 * just use the boundary point of the other */
+			if (weld1->profile.super_r == PRO_LINE_R &&
+			    weld2->profile.super_r != PRO_LINE_R)
+				copy_v3_v3(co, vb);
+			else if (weld2->profile.super_r == PRO_LINE_R &&
+				 weld1->profile.super_r != PRO_LINE_R)
+				copy_v3_v3(co, va);
+			else
+				mid_v3_v3v3(co, va, vb);
 			copy_v3_v3(mesh_vert(vm, weld1->index, 0, k)->co, co);
 			create_mesh_bmvert(bm, vm, weld1->index, 0, k, bv->v);
 		}