[Bf-blender-cvs] SVN commit: /data/svn/bf-blender [44670] trunk/blender/source/blender/bmesh /intern: Add BM_face_split_n which splits a face with intermediate points with given coordinates .

[Howard Trickey]

Revision: 44670
          http://projects.blender.org/scm/viewvc.php?view=rev&root=bf-blender&revision=44670
Author:   howardt
Date:     2012-03-06 12:09:35 +0000 (Tue, 06 Mar 2012)
Log Message:
-----------
Add BM_face_split_n which splits a face with intermediate points with given coordinates.

This will be used in soon-to-be-commited knife tool rewrite.
Interpolates using the original face.
Also fixed or improved a couple of comments.

Modified Paths:
--------------
    trunk/blender/source/blender/bmesh/intern/bmesh_core.c
    trunk/blender/source/blender/bmesh/intern/bmesh_mods.c
    trunk/blender/source/blender/bmesh/intern/bmesh_mods.h

Modified: trunk/blender/source/blender/bmesh/intern/bmesh_core.c
===================================================================
--- trunk/blender/source/blender/bmesh/intern/bmesh_core.c	2012-03-06 11:34:57 UTC (rev 44669)
+++ trunk/blender/source/blender/bmesh/intern/bmesh_core.c	2012-03-06 12:09:35 UTC (rev 44670)
@@ -1216,12 +1216,17 @@
  * \brief Split Edge Make Vert (SEMV)
  *
  * Takes \a e edge and splits it into two, creating a new vert.
+ * \a tv should be one end of \a e : the newly created edge
+ * will be attached to that end and is returned in \a r_e.
  *
  * \par Examples:
  *
- *     Before: OV---------TV
- *     After:  OV----NV---TV
+ *                     E
+ *     Before: OV-------------TV
  *
+ *                 E       RE
+ *     After:  OV------NV-----TV
+ *
  * \return The newly created BMVert pointer.
  */
 BMVert *bmesh_semv(BMesh *bm, BMVert *tv, BMEdge *e, BMEdge **r_e)
@@ -1235,10 +1240,8 @@
 
 	ov = bmesh_edge_other_vert_get(e, tv);
 
-	/* count valence of v1 */
 	valence1 = bmesh_disk_count(ov);
 
-	/* count valence of v2 */
 	valence2 = bmesh_disk_count(tv);
 
 	nv = BM_vert_create(bm, tv->co, tv);
@@ -1247,7 +1250,7 @@
 	bmesh_disk_edge_remove(ne, tv);
 	bmesh_disk_edge_remove(ne, nv);
 
-	/* remove e from v2's disk cycle */
+	/* remove e from tv's disk cycle */
 	bmesh_disk_edge_remove(e, tv);
 
 	/* swap out tv for nv in e */

Modified: trunk/blender/source/blender/bmesh/intern/bmesh_mods.c
===================================================================
--- trunk/blender/source/blender/bmesh/intern/bmesh_mods.c	2012-03-06 11:34:57 UTC (rev 44669)
+++ trunk/blender/source/blender/bmesh/intern/bmesh_mods.c	2012-03-06 12:09:35 UTC (rev 44670)
@@ -314,7 +314,7 @@
  * \param f the original face
  * \param v1, v2 vertices which define the split edge, must be different
  * \param r_l pointer which will receive the BMLoop for the split edge in the new face
- * \param example Face used to initialize settings
+ * \param example Edge used for attributes of splitting edge, if non-NULL
  *
  * \return Pointer to the newly created face representing one side of the split
  * if the split is successful (and the original original face will be the
@@ -371,6 +371,75 @@
 }
 
 /**
+ * \brief Face Split with intermediate points
+ *
+ * Like BM_face_split, but with an edge split by \a n intermediate points with given coordinates.
+ *
+ * \param bm The bmesh
+ * \param f the original face
+ * \param v1, v2 vertices which define the split edge, must be different
+ * \param co Array of coordinates for intermediate points
+ * \param n Length of \a cos (must be > 0)
+ * \param r_l pointer which will receive the BMLoop for the first split edge (from \a v1) in the new face
+ * \param example Edge used for attributes of splitting edge, if non-NULL
+ *
+ * \return Pointer to the newly created face representing one side of the split
+ * if the split is successful (and the original original face will be the
+ * other side). NULL if the split fails.
+ */
+BMFace *BM_face_split_n(BMesh *bm, BMFace *f, BMVert *v1, BMVert *v2, float cos[][3], int n,
+                        BMLoop **r_l, BMEdge *example)
+{
+	BMFace *nf, *of;
+	BMLoop *l_dummy;
+	BMEdge *e, *newe;
+	BMVert *newv;
+	int i, j;
+
+	BLI_assert(v1 != v2);
+
+	of = BM_face_copy(bm, f, TRUE, TRUE);
+
+	if (!r_l)
+		r_l = &l_dummy;
+	
+#ifdef USE_BMESH_HOLES
+	nf = bmesh_sfme(bm, f, v1, v2, r_l, NULL, example);
+#else
+	nf = bmesh_sfme(bm, f, v1, v2, r_l, example);
+#endif
+	/* bmesh_sfme returns in r_l a Loop for nf going from v1 to v2.
+	 * The radial_next is for f and goes from v2 to v1  */
+
+	if (nf) {
+		e = (*r_l)->e;
+		for (i = 0; i < n; i++) {
+			newv = bmesh_semv(bm, v2, e, &newe);
+			BLI_assert(newv != NULL);
+			/* bmesh_semv returns in newe the edge going from newv to tv */
+			copy_v3_v3(newv->co, cos[i]);
+
+			/* interpolate the loop data for the loops with v==newv, using orig face */
+			for (j = 0; j < 2; j++) {
+				BMEdge *e_iter = (j==0)? e : newe;
+				BMLoop *l_iter = e_iter->l;
+				do {
+					if (l_iter->v == newv) {
+						/* this interpolates both loop and vertex data */
+						BM_loop_interp_from_face(bm, l_iter, of, TRUE, TRUE);
+					}
+				} while ((l_iter = l_iter->radial_next) != e_iter->l);
+			}
+			e = newe;
+		}
+	}
+
+	BM_face_verts_kill(bm, of);
+
+	return nf;
+}
+
+/**
  * \brief Vert Collapse Faces
  *
  * Collapses vertex \a kv that has only two manifold edges
@@ -534,7 +603,10 @@
  * \brief Edge Split
  *
  * Splits an edge. \a v should be one of the vertices in \a e and defines
- * the direction of the splitting operation for interpolation purposes.
+ * the "from" end of the splitting operation: the new vertex will be
+ * \a percent of the way from \a v to the other end.
+ * The newly created edge is attached to \a v and is returned in \a r_e.
+ * The original edge \a e will be the other half of the split.
  *
  * \return The new vert
  */

Modified: trunk/blender/source/blender/bmesh/intern/bmesh_mods.h
===================================================================
--- trunk/blender/source/blender/bmesh/intern/bmesh_mods.h	2012-03-06 11:34:57 UTC (rev 44669)
+++ trunk/blender/source/blender/bmesh/intern/bmesh_mods.h	2012-03-06 12:09:35 UTC (rev 44670)
@@ -42,6 +42,11 @@
                       BMVert *v1, BMVert *v2,
                       BMLoop **r_l, BMEdge *example);
 
+BMFace *BM_face_split_n(BMesh *bm, BMFace *f,
+                      BMVert *v1, BMVert *v2,
+                      float cos[][3], int n,
+                      BMLoop **r_l, BMEdge *example);
+
 BMEdge* BM_vert_collapse_faces(BMesh *bm, BMEdge *ke, BMVert *kv, float fac,
                                const short join_faces, const short kill_degenerate_faces);
 BMEdge* BM_vert_collapse_edge(BMesh *bm, BMEdge *ke, BMVert *kv,