[Bf-blender-cvs] SVN commit: /data/svn/bf-blender [35671] trunk/blender/build_files: Buildbot initial configuration files, for http://builder.blender.org
Brecht Van Lommel
brechtvanlommel at pandora.be
Mon Mar 21 17:46:26 CET 2011
Revision: 35671
http://projects.blender.org/scm/viewvc.php?view=rev&root=bf-blender&revision=35671
Author: blendix
Date: 2011-03-21 16:46:26 +0000 (Mon, 21 Mar 2011)
Log Message:
-----------
Buildbot initial configuration files, for http://builder.blender.org
Maintained in svn to make it easier for others to contribute changes,
actually updating builder.blender.org requires manual update on the
server.
Added Paths:
-----------
trunk/blender/build_files/buildbot/
trunk/blender/build_files/buildbot/master.cfg
trunk/blender/build_files/buildbot/master_unpack.py
trunk/blender/build_files/buildbot/slave_pack.py
Added: trunk/blender/build_files/buildbot/master.cfg
===================================================================
--- trunk/blender/build_files/buildbot/master.cfg (rev 0)
+++ trunk/blender/build_files/buildbot/master.cfg 2011-03-21 16:46:26 UTC (rev 35671)
@@ -0,0 +1,203 @@
+# -*- python -*-
+# ex: set syntax=python:
+
+# Dictionary that the buildmaster pays attention to.
+c = BuildmasterConfig = {}
+
+# BUILD SLAVES
+#
+# We load the slaves and their passwords from a separator file, so we can have
+# this one in SVN.
+
+from buildbot.buildslave import BuildSlave
+import master_private
+
+c['slaves'] = []
+
+for slave in master_private.slaves:
+ c['slaves'].append(BuildSlave(slave['name'], slave['password']))
+
+# TCP port through which slaves connect
+
+c['slavePortnum'] = 9989
+
+# CHANGE SOURCES
+
+from buildbot.changes.svnpoller import SVNPoller
+
+c['change_source'] = SVNPoller(
+ 'https://svn.blender.org/svnroot/bf-blender/trunk/',
+ pollinterval=1200)
+
+# BUILDERS
+#
+# The 'builders' list defines the Builders, which tell Buildbot how to perform a build:
+# what steps, and which slaves can execute them. Note that any particular build will
+# only take place on one slave.
+
+from buildbot.process.factory import BuildFactory
+from buildbot.steps.source import SVN
+from buildbot.steps.shell import ShellCommand
+from buildbot.steps.shell import Compile
+from buildbot.steps.shell import Test
+from buildbot.steps.transfer import FileUpload
+from buildbot.steps.transfer import FileDownload
+from buildbot.steps.master import MasterShellCommand
+from buildbot.config import BuilderConfig
+
+# add builder utility
+
+c['builders'] = []
+buildernames = []
+
+def add_builder(c, name, factory):
+ slavenames = []
+
+ for slave in master_private.slaves:
+ if name in slave['builders']:
+ slavenames.append(slave['name'])
+
+ f = factory(name)
+ c['builders'].append(BuilderConfig(name=name, slavenames=slavenames, factory=f, category='blender'))
+ buildernames.append(name)
+
+# common steps
+
+def svn_step():
+ return SVN(baseURL='https://svn.blender.org/svnroot/bf-blender/%%BRANCH%%/blender', mode='update', defaultBranch='trunk', workdir='blender')
+
+def lib_svn_step(dir):
+ return SVN(name='lib svn', baseURL='https://svn.blender.org/svnroot/bf-blender/%%BRANCH%%/lib/' + dir, mode='update', defaultBranch='trunk', workdir='lib/' + dir)
+
+def cmake_compile_step():
+ return Compile(command=['make'], workdir='blender')
+
+def cmake_test_step():
+ return Test(workdir='blender') # make test
+
+def scons_compile_step():
+ return Compile(command=['python', 'scons/scons.py'], workdir='blender')
+
+class SlavePack(ShellCommand):
+ pack_script = 'slave_pack.py'
+ def start(self):
+ if self.getProperty('buildername').find('scons')>=0:
+ self.setCommand(['python', pack_script, 'scons'])
+ else:
+ self.setCommand(['python', pack_script, 'cmake'])
+ ShellCommand.start(self)
+
+def file_upload(f, id):
+ filename = 'buildbot_upload_' + id + '.zip'
+ pack_script = 'slave_pack.py'
+ unpack_script = 'master_unpack.py'
+
+ f.addStep(FileDownload(name='download', mastersrc=pack_script, slavedest=pack_script))
+ f.addStep(ShellCommand(name='package', command=['python', pack_script], description='packaging', descriptionDone='packaged'))
+ f.addStep(FileUpload(name='upload', slavesrc='buildbot_upload.zip', masterdest=filename, maxsize=100*1024*1024))
+ f.addStep(MasterShellCommand(name='unpack', command=['python', unpack_script, filename], description='unpacking', descriptionDone='unpacked'))
+
+# linux cmake
+
+def linux_cmake(id):
+ f = BuildFactory()
+ f.addStep(svn_step())
+ f.addStep(cmake_compile_step())
+ f.addStep(cmake_test_step())
+ file_upload(f, id)
+ return f
+
+add_builder(c, 'linux_x86_64_cmake', linux_cmake)
+
+# mac cmake
+
+def mac_cmake(id):
+ f = BuildFactory()
+ f.addStep(svn_step())
+ f.addStep(lib_svn_step('darwin-9.x.universal'))
+ f.addStep(cmake_compile_step())
+ f.addStep(cmake_test_step())
+ file_upload(f, id)
+ return f
+
+add_builder(c, 'mac_x86_64_cmake', mac_cmake)
+
+# win32 scons
+
+# TODO: add scons test target
+def win32_scons(id):
+ f = BuildFactory()
+ f.addStep(svn_step())
+ f.addStep(lib_svn_step('windows'))
+ f.addStep(scons_compile_step())
+ file_upload(f, id)
+ return f
+
+add_builder(c, 'win32_scons', win32_scons)
+
+# SCHEDULERS
+#
+# Decide how to react to incoming changes.
+
+from buildbot.scheduler import Scheduler
+from buildbot.schedulers import timed
+
+c['schedulers'] = []
+#c['schedulers'].append(Scheduler(name="all", branch=None,
+# treeStableTimer=None,
+# builderNames=[]))
+#c['schedulers'].append(timed.Periodic(name="nightly",
+# builderNames=buildernames,
+# periodicBuildTimer=24*60*60))
+
+c['schedulers'].append(timed.Nightly(name='nightly',
+ builderNames=buildernames,
+ hour=3,
+ minute=0))
+
+# STATUS TARGETS
+#
+# 'status' is a list of Status Targets. The results of each build will be
+# pushed to these targets. buildbot/status/*.py has a variety to choose from,
+# including web pages, email senders, and IRC bots.
+
+c['status'] = []
+
+from buildbot.status import html
+from buildbot.status.web import auth, authz
+
+authz_cfg=authz.Authz(
+ # change any of these to True to enable; see the manual for more
+ # options
+ gracefulShutdown = False,
+ forceBuild = True, # use this to test your slave once it is set up
+ forceAllBuilds = False,
+ pingBuilder = False,
+ stopBuild = False,
+ stopAllBuilds = False,
+ cancelPendingBuild = False,
+)
+
+c['status'].append(html.WebStatus(http_port=8010, authz=authz_cfg))
+
+# PROJECT IDENTITY
+
+c['projectName'] = "Blender"
+c['projectURL'] = "http://www.blender.org"
+
+# the 'buildbotURL' string should point to the location where the buildbot's
+# internal web server (usually the html.WebStatus page) is visible. This
+# typically uses the port number set in the Waterfall 'status' entry, but
+# with an externally-visible host name which the buildbot cannot figure out
+# without some help.
+
+c['buildbotURL'] = "http://builder.blender.org/"
+
+# DB URL
+#
+# This specifies what database buildbot uses to store change and scheduler
+# state. You can leave this at its default for all but the largest
+# installations.
+
+c['db_url'] = "sqlite:///state.sqlite"
+
Added: trunk/blender/build_files/buildbot/master_unpack.py
===================================================================
--- trunk/blender/build_files/buildbot/master_unpack.py (rev 0)
+++ trunk/blender/build_files/buildbot/master_unpack.py 2011-03-21 16:46:26 UTC (rev 35671)
@@ -0,0 +1,117 @@
+# ##### BEGIN GPL LICENSE BLOCK #####
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# ##### END GPL LICENSE BLOCK #####
+
+# Runs on Buildbot master, to unpack incoming unload.zip into latest
+# builds directory and remove older builds.
+
+import os
+import shutil
+import sys
+import zipfile
+
+# extension stripping
+def strip_extension(filename):
+ extensions = ['.zip', '.tar', '.bz2', '.gz', '.tgz', '.tbz', '.exe']
+
+ for ext in extensions:
+ if filename.endswith(ext):
+ filename = filename[:-len(ext)]
+
+ return filename
+
+# extract platform from package name
+def get_platform(filename):
+ # name is blender-version-platform.extension. we want to get the
+ # platform out, but there may be some variations, so we fiddle a
+ # bit to handle current and hopefully future names
+ filename = strip_extension(filename)
+ filename = strip_extension(filename)
+
+ tokens = filename.split("-")
+ platforms = ['osx', 'mac', 'bsd', 'windows', 'linux', 'source', 'irix', 'solaris']
+ platform_tokens = []
+ found = False
+
+ for i, token in enumerate(tokens):
+ if not found:
+ for platform in platforms:
+ if token.lower().find(platform) != -1:
+ found = True
+
+ if found:
+ platform_tokens += [token]
+
+ return '-'.join(platform_tokens)
+
+# get filename
+if len(sys.argv) < 2:
+ sys.stderr.write("Not enough arguments, expecting file to unpack\n")
+ sys.exit(1)
+
+filename = sys.argv[1]
+
+# open zip file
+if not os.path.exists(filename):
+ sys.stderr.write("File " + filename + " not found.\n")
+ sys.exit(1)
+
+try:
+ z = zipfile.ZipFile(filename, "r")
+except Exception, ex:
+ sys.stderr.write('Failed to open zip file: ' + str(ex) + '\n')
+ sys.exit(1)
+
+if len(z.namelist()) != 1:
+ sys.stderr.write("Expected on file in " + filename + ".")
+ sys.exit(1)
+
+package = z.namelist()[0]
+packagename = os.path.basename(package)
+
+# detect platform
+platform = get_platform(packagename)
+
+if platform == '':
+ sys.stderr.write('Failed to detect platform from package: ' + packagename + '\n')
+ sys.exit(1)
+
+# extract
+dir = 'public_html/latest_builds'
+
+try:
+ zf = z.open(package)
+ f = file(os.path.join(dir, packagename), "wb")
+
+ shutil.copyfileobj(zf, f)
+
+ zf.close()
+ z.close()
+except Exception, ex:
+ sys.stderr.write('Failed to unzip package: ' + str(ex) + '\n')
+ sys.exit(1)
+
+# remove other files from the same platform
+try:
+ for f in os.listdir(dir):
+ if f.lower().find(platform.lower()) != -1:
+ if f != packagename:
+ os.remove(os.path.join(dir, f))
+except Exception, ex:
+ sys.stderr.write('Failed to remove old packages: ' + str(ex) + '\n')
+ sys.exit(1)
+
Added: trunk/blender/build_files/buildbot/slave_pack.py
===================================================================
--- trunk/blender/build_files/buildbot/slave_pack.py (rev 0)
+++ trunk/blender/build_files/buildbot/slave_pack.py 2011-03-21 16:46:26 UTC (rev 35671)
@@ -0,0 +1,87 @@
+# ##### BEGIN GPL LICENSE BLOCK #####
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
@@ Diff output truncated at 10240 characters. @@
More information about the Bf-blender-cvs
mailing list