Hi,<br>
<br>
I am an undergraduate taking computer science at Newcastle upon tyne university<br>
in england. I have just finished the first year of study and was looking at doing a project for <br>the university of the Summer.<br><br>The Computer Science has a VR suite that is not used as much as the school believes it should be used, <br>
and so I would like to if possible get blender working with the VR suite. At the moment we have commercial software which could allow an architect to view a building. Also, we have a 3d video software tha only allows 30 secs playback (which is greatly annoying in a demonstration) and other commercial software that for example allows us to see a buckyball in 3d or protein molecules.<br>
<br>I think it would be nice to be able to demonstrate more of the capabilities of the VR suite rather than demonstrating examples which are 5-10 years old.<br><br>Its not normal for a 1st year to have a summer project, so this is mostly unofficial and I would not be paid. I just want it to be used more, and I would like to specialise in graphics in my 3rd year and so if the VR suite is used more, then more funding could be presented to it.. ;)<br>
<br>I have managed to get two researches interested..<br>
<br>
Our aims for the project are:<br>
<br>
<i>- to create a software environment that will allow a user to view a model, environment or annimation<br>
  with stereo vision on all three projector screens.<br>
 <br>
- for software environment to be easy to use and set up so that other departments will be able to use<br>
  without hindrance through bad interfaces with the software.<br>
 <br>
- to allow us to stop relying on commercial software for our virtual reality suite and enter the open<br>
  source movement.</i><br>
 <br>
The hardware that we have is as detailed:<br>
<br>
<b>VR Suite</b><br>
<br>
    * Barco MoveLite <br>
          o 3x Barco SLM R6 Galaxy Warp (5000 lumen, DLP) Projectors <br>
    * 3 SGI 22&quot; Monitors (Up to 2048x1536 at 85Hz) (C220A) <br>
    * SGI keyboard and mouse<br>
* Intersense IS-900 Wired Tracking System - with head tracking
(100-90000-AWHT) and wand (100-90000-AWWD), using 9 ultrasound
transmitters<br>
    * Marantz Professional DVD Player (PMD930)<br>
    * Philips Video Recorder (VR840)<br>
    * Crestron 12&quot; LCD Panel (TPS4500) <br>
    * 20 Pairs of CrystalEyes StereoGraphics Active Stereo Glasses  <br>
    * Stereo Emitter for CrystalEyes active stereo glasses  <br>
    * Handheld Wireless Microphone (ACT-707H)  <br>
    * Tie-clip Wireless Microphone (ACT-707T) <br>
    * 7.1 Tannoy Sound System (7 i6MP, 1 S-SUB 15)<br>
    * 4 ARTtrack 2 Cameras  <br>
    * 2 Extron Digital Video Scalers (DVS204)  <br>
    * Icron USB Ranger 110/410  <br>
    * 1 Pulizzi Z-line Power Controller  <br>
<br>
<b>Server Room</b><br>
<br>
    * SGI Onyx4  <br>
          o 8 700 MHZ IP35 Processors<br>
          o 8GB RAM<br>
          o 1TB TP900 SCSI Disk  <br>
          o 8 channel PCI digital audio card<br>
    * 1 SGI 22&quot; Monitor (Up to 2048x1536 at 85Hz) (C220A)  <br>
    * 2 MiPro Wireless Receivers (ACT-707S)  <br>
    * Crestron Pro 2 Professional Control Processor  <br>
    * Biamp Systems Audia Solo (8x8)  <br>
    * Barco Quad Switcher 350  <br>
    * ART Tracking and Viewscape PC<br>
    * Myryad MDP500 Digital Preamplifier-Processor (With Dolby Digital-Ex Pro Login II)  <br>
    * Barco Viewscape (2 units - 16xD320) <br>
    * Autopatch 1Y-16 (2 units) <br>
    * 2 Pulizzi Z-line Power Controllers  <br>
    * Fostex VC-8 ADAT/Analog Converter  <br>
<br>
<br>
Blender does allow stereo rendering, but our problem lies in having each of the 3 pc&#39;s outputting in sync.<br>
<br>
We have sync cards in the PCs that take a signal from the master, but
the software (blender) needs to support this. It can be done in
software over the network also, but that is less efficient.<br>
 <br>
Can anyone give us a better outlook on how to achieve this?<br><br>Tests have shown that the stereo rendering options in the game settings of blender dont work, they dont seem to do anything other than show two images on the screen..<br>
<br>On a completely other topic, I would like to learn how to code for Blender, I have learnt how to code in java this year, and so.. where would be the best place to start?<br>
 <br>
 Many thanks,<br>
 <br>Regards,<br><br>
 Mandoragon<br>