[Bf-committers] blender do not updates from git

Bastien Montagne montagne29 at wanadoo.fr
Tue Dec 10 22:31:43 CET 2013 

Yeah, actually, there was an error in how the script generated the paths 
for static ilmbase/openexr libs for scons config… Just add ${BF_OPENEXR} 
before all paths in BF_OPENEXR_LIB_STATIC. :)

Sorry for the mistake.

On 10/12/2013 22:27, Piotr Arlukowicz wrote:
> Dear Bastien,
>
> sure, I have  'install' dir, and inside is bunch of folders. One of them is
> openexr-2.1.0, and there is also a symbolic link to it 'openexr'.
> There are also 'linux', 'oiio-1.3.9' linked as 'oiio' and 'ffmpeg-1.0'
> linked as 'ffmpeg'.
> Thank you for checking. Maybe I should try 'cmake way'? I don't like it
> because it requires a lot of configuration, fiddling with -D variables and
> even cmake-gui help only partially. Scons is way simpler in comparison.
>
>
> pz
> piotr
> --
> Piotr Arlukowicz
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.1
> GCS/ED/IT/S d++(-)>--pu s(+):(+)> a C++(+++)$@>++++$  ULAVISC*()$>+++$
> P++(+++)$>++++ L++(+++)$@>++++$ !E---(---)>++ W++(+++)$@>+++ N(+)>++ o--?
> !K-(-)>-$ w++(+)>-- !O-(-)>- !M-(-)>-- !V-(-)>- PS(+)>++ !PE()>+  Y PGP>+
> t(-) !5? !X R()>* tv- b++ DI++ D+(++)>+++ G++@ e++++>+++++ h---()>++ r+++
> y+++
> ------END GEEK CODE BLOCK------
>
>
> 2013/12/10 Bastien Montagne <montagne29 at wanadoo.fr>
>
>> Hi Piotr,
>>
>> Just to be sure, do you have an 'openexr' dir in your
>> '$HOME/blender-git/install' dir? 99% sure you do, but…
>>
>> I'll check again install_deps.sh (don't use scons here :/).
>>
>> Bastien
>>
>> On 10/12/2013 21:57, Piotr Arlukowicz wrote:
>>> Thank you Brecht!
>>>
>>> It seems to be really up to date, that's good. However, after I followed
>>> the procedure and the compilation suddenly fails. At least git updates
>> are
>>> working!
>>>
>>> I did fresh install of everything related to blender.
>>> My setup is the following:
>>>
>>> install_deps.sh file has the following config paths (changed by me as
>> said
>>> in instructions):
>>>
>>> DISTRO="mint-piotao"
>>> RPM=""
>>> SRC="$HOME/blender-git/deps"
>>> INST="$HOME/blender-git/install"
>>> TMP="/tmp"
>>>
>>> So, deps dir is inside my blender-git folder.
>>>
>>> I followed instructions from wiki, and I've prepare my own user-defs.py
>>> file. Here it is:
>>>
>>> BF_FFMPEG_LIB = 'avformat avcodec swscale avutil avdevice theoradec
>>> theoraenc theora vorbisenc vorbisfile vorbis ogg xvidcore vpx mp3lame
>> x264
>>> openjpeg'
>>> BF_FFMPEG = '/home/piotao/blender-git/install/ffmpeg'
>>> BF_OIIO = '/home/piotao/blender-git/install/oiio'
>>> BF_OPENEXR_LIB_STATIC = '/lib/libHalf.a /lib/libIlmImf-2_1.a
>>> /lib/libIex-2_1.a /lib/libImath-2_1.a /lib/libIlmThread-2_1.a'
>>> BF_OPENEXR_LIB = 'Half IlmImf-2_1 Iex-2_1 Imath-2_1 '
>>> BF_OPENEXR = '/home/piotao/blender-git/install/openexr'
>>> WITH_BF_BOOST = True
>>> WITH_BF_COLLADA = False
>>> WITH_BF_CYCLES = True
>>> WITH_BF_OCIO = True
>>> WITH_BF_OIIO = True
>>> WITH_BF_STATICOCIO = True
>>> WITH_BF_STATICOPENEXR = True
>>>
>>> I've run usual compilation using python scons/scons.py from blender dir.
>>> Much of the process was done, but it finally fails. I think it is due to
>>> /lib/ paths which should be diffrent.
>>>
>>> Error I've got:
>>> ....
>>> scons: `/home/piotao/blender-git/build/linux/lib/libextern_lzma.a' is up
>> to
>>> date.
>>> scons: `/home/piotao/blender-git/build/linux/lib/libextern_carve.a' is up
>>> to date.
>>> scons: `/home/piotao/blender-git/build/linux/lib/libextern_xdnd.a' is up
>> to
>>> date.
>>> Compiling ==> 'creator.c'
>>> Compiling ==> 'buildinfo.c'
>>> scons: *** [/home/piotao/blender-git/build/linux/bin/blender] Source
>>> `/lib/libHalf.a' not found, needed by target
>>> `/home/piotao/blender-git/build/linux/bin/blender'.
>>> scons: building terminated because of errors.
>>>
>>> I analyzed install_deps.sh script, but there was no place where proper
>>> paths were set. I don't know how to set up proper path for libs like
>>> ILMbase, which seems to be a core of the problem. Am I right?
>>> How can I repair this setup to run it smoothly?
>>>
>>>
>>> pz
>>> piotr
>>> --
>>> Piotr Arlukowicz
>>> -----BEGIN GEEK CODE BLOCK-----
>>> Version: 3.1
>>> GCS/ED/IT/S d++(-)>--pu s(+):(+)> a C++(+++)$@>++++$  ULAVISC*()$>+++$
>>> P++(+++)$>++++ L++(+++)$@>++++$ !E---(---)>++ W++(+++)$@>+++ N(+)>++ o--?
>>> !K-(-)>-$ w++(+)>-- !O-(-)>- !M-(-)>-- !V-(-)>- PS(+)>++ !PE()>+  Y PGP>+
>>> t(-) !5? !X R()>* tv- b++ DI++ D+(++)>+++ G++@ e++++>+++++ h---()>++
>> r+++
>>> y+++
>>> ------END GEEK CODE BLOCK------
>>>
>>>
>>> 2013/12/10 Brecht Van Lommel <brechtvanlommel at pandora.be>
>>>
>>>> Hi,
>>>>
>>>> The instructions here should be up to date:
>>>> http://wiki.blender.org/index.php/Dev:Doc/Building_Blender/Linux
>>>>
>>>> The git submodule will get you addons and translations, but not any
>>>> libraries. There hasn't been a lib/ directory for linux for a long
>>>> time, it was removed. Maybe you were still using it somehow, and
>>>> copying that directory from a blender-svn to a blender-git directory
>>>> may work still, but it's not really a supported workflow.
>>>>
>>>> The build instructions explain how to use "install_deps.sh" to install
>>>> dependencies linux ffmpeg, and when it's done building them it will
>>>> give you the scons configuration to put in user-config.py.
>>>>
>>>> Brecht.
>>>>
>>>>
>>>> On Tue, Dec 10, 2013 at 2:41 PM, Piotr Arlukowicz <piotao at gmail.com>
>>>> wrote:
>>>>> Thank you!
>>>>> I got to the page http://developer.blender.org/diffusion/B/ where I
>>>>> performed all instructions, with no errors. Then I enter to blender
>>>>> directory, put my config in user-config.py (worked in svn version), and
>>>> run
>>>>> the command python scons/scons.py. The compilation started and broke at
>>>> the
>>>>> error:
>>>>>
>>>>> Compiling ==> 'writeffmpeg.c'
>>>>> source/blender/blenkernel/intern/writeffmpeg.c:42:34: fatal error:
>>>>> libavformat/avformat.h: Nie ma takiego pliku ani katalogu
>>>>>    #include <libavformat/avformat.h>
>>>>>                                     ^
>>>>> compilation terminated.
>>>>> scons: ***
>>>>>
>> [/home/piotao/blender-git/build/linux/source/blender/blenkernel/intern/writeffmpeg.o]
>>>>> Error 1
>>>>> scons: building terminated because of errors.
>>>>>
>>>>>
>>>>> It's obvious that I should provide libs, extensions and addons to the
>>>>> project, but they are now in diffrent git repos and I found nowhere the
>>>>> explanation how to incorporate them and where to put them. So, should I
>>>> put
>>>>> them along with blender dir, as for svn versions and configure scons or
>>>>> cmake to use all paths etc?
>>>>>
>>>>> If yes, then to compile the whole blender, there should be more
>> commands
>>>>> given, and this maybe should be put on WIKI page.
>>>>>
>>>>> So, my knowledge is based on hints from you and now I did:
>>>>>
>>>>> git clone git://git.blender.org/blender.gitcd blender
>>>>> git submodule update --init --recursive
>>>>> git submodule foreach git checkout master
>>>>> git submodule foreach git pull --rebase origin master
>>>>>
>>>>> --> Here should be some commands to fetch/pull/get/whatever all
>>>>> required things like addons, extensions, etc.
>>>>>
>>>>> and here goes some configuration and compilation stuff.
>>>>> Could somebody be so nice and provide me with the missing information?
>>>>> I think this should also be put to WIKI and I can do it if I manage to
>>>>> get the control of the process.
>>>>>
>>>>>
>>>>> pz
>>>>> piotr
>>>>> --
>>>>> Piotr Arlukowicz
>>>>> -----BEGIN GEEK CODE BLOCK-----
>>>>> Version: 3.1
>>>>> GCS/ED/IT/S d++(-)>--pu s(+):(+)> a C++(+++)$@>++++$  ULAVISC*()$>+++$
>>>>> P++(+++)$>++++ L++(+++)$@>++++$ !E---(---)>++ W++(+++)$@>+++ N(+)>++
>> o--?
>>>>> !K-(-)>-$ w++(+)>-- !O-(-)>- !M-(-)>-- !V-(-)>- PS(+)>++ !PE()>+  Y
>> PGP>+
>>>>> t(-) !5? !X R()>* tv- b++ DI++ D+(++)>+++ G++@ e++++>+++++ h---()>++
>>>> r+++
>>>>> y+++
>>>>> ------END GEEK CODE BLOCK------
>>>>>
>>>>>
>>>>> 2013/12/8 Scott Petrovic <scottpetrovic at gmail.com>
>>>>>
>>>>>> correct. You should be going here to get the latest code for different
>>>>>> repositories
>>>>>>
>>>>>> http://developer.blender.org/diffusion/
>>>>>>
>>>>>> Scott
>>>>>>
>>>>>>
>>>>>> On Sun, Dec 8, 2013 at 10:55 AM, Nicholas Rishel <
>> rishel.nick at gmail.com
>>>>>>> wrote:
>>>>>>> Looks like that's a mirror the old SVN repository which is no longer
>>>>>>> committed to.
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Dec 8, 2013 at 10:12 AM, Piotr Arlukowicz <piotao at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Dear Brecht,
>>>>>>>>
>>>>>>>> thank you for the answer. The log is quite short, but let me paste
>>>> it
>>>>>> to
>>>>>>>> pasteall: http://www.pasteall.org/47889
>>>>>>>>
>>>>>>>> Also git pull -v returns just this:
>>>>>>>> $ git pull -v
>>>>>>>> >From git://gitorious.org/blenderprojects/blender
>>>>>>>>    = [up to date]      master     -> origin/master
>>>>>>>>    = [up to date]      blender.fi -> origin/blender.fi
>>>>>>>>    = [up to date]      renderfarm -> origin/renderfarm
>>>>>>>>
>>>>>>>> I am not yet git-oriented and can't find the clue.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> pz
>>>>>>>> piotr
>>>>>>>> --
>>>>>>>> Piotr Arlukowicz
>>>>>>>> -----BEGIN GEEK CODE BLOCK-----
>>>>>>>> Version: 3.1
>>>>>>>> GCS/ED/IT/S d++(-)>--pu s(+):(+)> a C++(+++)$@>++++$
>>>>    ULAVISC*()$>+++$
>>>>>>>> P++(+++)$>++++ L++(+++)$@>++++$ !E---(---)>++ W++(+++)$@>+++ N(+)>++
>>>>>> o--?
>>>>>>>> !K-(-)>-$ w++(+)>-- !O-(-)>- !M-(-)>-- !V-(-)>- PS(+)>++ !PE()>+  Y
>>>>>> PGP>+
>>>>>>>> t(-) !5? !X R()>* tv- b++ DI++ D+(++)>+++ G++@ e++++>+++++
>>>> h---()>++
>>>>>>> r+++
>>>>>>>> y+++
>>>>>>>> ------END GEEK CODE BLOCK------
>>>>>>>>
>>>>>>>>
>>>>>>>> 2013/12/8 Brecht Van Lommel <brechtvanlommel at pandora.be>
>>>>>>>>
>>>>>>>>> Did you perhaps check out a branch? You can check which branch you
>>>>>> are
>>>>>>>>> on with "git branch", and go back to the master branch with "git
>>>>>>>>> checkout master".
>>>>>>>>>
>>>>>>>>> If that doesn't help, you could paste the output of these
>>>> commands,
>>>>>> so
>>>>>>>>> we get a sense of what is going on in this setup:
>>>>>>>>> git branch -a
>>>>>>>>> git remote -v
>>>>>>>>> git fetch origin
>>>>>>>>>
>>>>>>>>> Brecht.
>>>>>>>>>
>>>>>>>>> On Sun, Dec 8, 2013 at 1:46 PM, Piotr Arlukowicz <
>>>> piotao at gmail.com>
>>>>>>>> wrote:
>>>>>>>>>> Hello,
>>>>>>>>>>
>>>>>>>>>> I'm unable to get newer versions of Blender using instructions
>>>> from
>>>>>>>> wiki
>>>>>>>>>> page:
>>>>>>> http://wiki.blender.org/index.php/Dev:Doc/Building_Blender/Linux
>>>>>>>>>> I used to build Blender with scons (cmake also, but I prefer
>>>>>> scons),
>>>>>>>> and
>>>>>>>>>> with svn repo it was easy - only svn up was required. I managed
>>>> to
>>>>>>> set
>>>>>>>> up
>>>>>>>>>> everything like in WIKI page for git, and first time compilation
>>>>>> went
>>>>>>>>> well,
>>>>>>>>>> but now I can't update repo. Simple command 'git pull' says it's
>>>>>>>> already
>>>>>>>>> up
>>>>>>>>>> to date, and there are no changes anywhere.
>>>>>>>>>> So, I'm doing something wrong, could you point me a right
>>>>>> direction?
>>>>>>>>>> best regards and thank you for all your hard work!
>>>>>>>>>> piotr
>>>>>>>>>> --
>>>>>>>>>> Piotr Arlukowicz
>>>>>>>>>> -----BEGIN GEEK CODE BLOCK-----
>>>>>>>>>> Version: 3.1
>>>>>>>>>> GCS/ED/IT/S d++(-)>--pu s(+):(+)> a C++(+++)$@>++++$
>>>>>>>    ULAVISC*()$>+++$
>>>>>>>>>> P++(+++)$>++++ L++(+++)$@>++++$ !E---(---)>++ W++(+++)$@>+++
>>>>>> N(+)>++
>>>>>>>> o--?
>>>>>>>>>> !K-(-)>-$ w++(+)>-- !O-(-)>- !M-(-)>-- !V-(-)>- PS(+)>++
>>>> !PE()>+  Y
>>>>>>>> PGP>+
>>>>>>>>>> t(-) !5? !X R()>* tv- b++ DI++ D+(++)>+++ G++@ e++++>+++++
>>>>>> h---()>++
>>>>>>>>> r+++
>>>>>>>>>> y+++
>>>>>>>>>> ------END GEEK CODE BLOCK------
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Bf-committers mailing list
>>>>>>>>>> Bf-committers at blender.org
>>>>>>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>>>>>> _______________________________________________
>>>>>>>>> Bf-committers mailing list
>>>>>>>>> Bf-committers at blender.org
>>>>>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Bf-committers mailing list
>>>>>>>> Bf-committers at blender.org
>>>>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Bf-committers mailing list
>>>>>>> Bf-committers at blender.org
>>>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Bf-committers mailing list
>>>>>> Bf-committers at blender.org
>>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>>>
>>>>> _______________________________________________
>>>>> Bf-committers mailing list
>>>>> Bf-committers at blender.org
>>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>> _______________________________________________
>>>> Bf-committers mailing list
>>>> Bf-committers at blender.org
>>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>>
>>> _______________________________________________
>>> Bf-committers mailing list
>>> Bf-committers at blender.org
>>> http://lists.blender.org/mailman/listinfo/bf-committers
>>>
>> _______________________________________________
>> Bf-committers mailing list
>> Bf-committers at blender.org
>> http://lists.blender.org/mailman/listinfo/bf-committers
>>
> _______________________________________________
> Bf-committers mailing list
> Bf-committers at blender.org
> http://lists.blender.org/mailman/listinfo/bf-committers

More information about the Bf-committers mailing list